Generac Power Systems 1046-0 Owner's Manual
  1. Manuals
  2. Brands
  3. Generac Power Systems Manuals
  4. Pressure Washer
  5. 1046-0
  6. Owner's manual
Generac Power Systems 1046-0 Owner's Manual

Generac Power Systems 1046-0 Owner's Manual

3500psi
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
3500PSI
GENERAC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1046-0 and is the answer not in the manual?

Questions and answers

Related Manuals for Generac Power Systems 1046-0

Summary of Contents for Generac Power Systems 1046-0

  • Page 1 3500PSI GENERAC...

  • Page 3: Product Specifications

    PRODUCT SPECIFICATIONS Pressure Washer Specifications Engine specifications CUSTOMER RESPONSIBILITIES...

  • Page 4: Know Your Pressure Washer

    KNOW YOUR PRESSURE WASHER...

  • Page 5: Carton Contents

    PREPARING THE PRESSURE WASHER FOR USE REMOVE PRESSURE WASHER FROM CARTON Attach the Handle CARTON CONTENTS Figure 1 — Attach the handle to the base.
  • Page 6 Add Engine Oil Add Gasoline Figure 5 — Add gasoline to fuel tank. Figure 4 — Add oil to engine crankcase. Do not attempt to start engine without adding oil.

  • Page 7: Checklist Before Starting Engine

    Connect Hose and Water Figure 8 — Connect the garden hose to water Supply to Pump inlet and turn ON the water. Figure 6 — Connect high pressure hose to spray gun. Figure 9 — Connect nozzle extension to spray gun.
  • Page 8 HOW TO USE YOUR PRESSURE WASHER How to Start Your Engine How to Stop Your Pressure Washer...
  • Page 9 How to Use the Dual Lance and Adjust Pressure Applying Detergent Figure 10 — Pressure control knob.
  • Page 10 Using The Nozzles Pressure Washer Rinsing Figure 11 — Spray patterns of nozzles Automatic Cool Down System (Thermal Relief)

  • Page 11: Pressure Washer Maintenance

    GENERAL MAINTENANCE RECOMMENDATIONS Check Chemical Siphoning Tube Check Gun and Nozzle Extension BEFORE EACH USE Purge Pump of Air and Contaminants PRESSURE WASHER MAINTENANCE Check and Clean Inlet Screen Check High Pressure Hose...
  • Page 12 Cleaning Chemical Siphoning Tube Belt Replacement Nozzle Maintenance Figure 13 — Pressure control knob. Figure 12 — Removing and cleaning nozzle.

  • Page 13: Engine Maintenance

    Pulley Alignment ENGINE MAINTENANCE SERVICE AND ADJUSTMENTS STORING THE ENGINE PREPARING THE UNIT FOR STORAGE...
  • Page 14 Problem Cause Correction...
  • Page 15 PROBLEM CAUSE CORRECTION...

Table of Contents