All manuals and user guides at all-guides.com PREPARING THE PRESSURE WASHER FOR USE REMOVE PRESSURE WASHER FROM CARTON CARTON CONTENTS Attach the Handle Figure 1 — Attach the top of the handle to the bottom of the handle.
Page 6
All manuals and user guides at all-guides.com Figure 2 — Insert the carriage bolt and hook and attach the knobs. Figure 4 — Add oil to engine crankcase. Do not attempt to start engine without adding oil. Figure 3 — Fit wire form on handle. Add Gasoline Add Engine Oil...
Page 7
All manuals and user guides at all-guides.com Figure 6 — Connect high pressure hose to spray gun. Figure 5 — Add gasoline to fuel tank. Figure 7 — Connect high pressure hose to pump. Connect Hose and Water Supply to Pump...
All manuals and user guides at all-guides.com CHECKLIST BEFORE Figure 8 — Connect the garden hose to water inlet and turn ON the water. STARTING ENGINE Figure 9 — Connect nozzle extension to spray gun.
Page 9
All manuals and user guides at all-guides.com HOW TO USE YOUR Figure 10 — Safety Latch. PRESSURE WASHER How to Start Your Engine How to Stop Your Pressure Washer...
Page 10
All manuals and user guides at all-guides.com How to Use the Adjustable Figure 12 — Pressure control knob. Nozzle and Adjust Pressure Figure 11 — Using the adjustable nozzle.
Page 11
All manuals and user guides at all-guides.com Applying Detergent with the Adjustable Nozzle Pressure Washer Rinsing Figure 13 — Insert the small filter into container of cleaning solution. Automatic Cool Down System (Thermal Relief)
All manuals and user guides at all-guides.com GENERAL MAINTENANCE RECOMMENDATIONS Check Chemical Injection Tube Check Gun and Wand BEFORE EACH USE Purge Pump of Air and Contaminants PRESSURE WASHER MAINTENANCE Check and Clean Inlet Screen Check High Pressure Hose...
All manuals and user guides at all-guides.com Cleaning Chemical Injection Tube Figure 18 — Backflushing the nozzle. Nozzle Maintenance ENGINE MAINTENANCE SERVICE AND ADJUSTMENTS Figure 17 — Removing and cleaning nozzle.
Need help?
Do you have a question about the 1042-2 and is the answer not in the manual?
Questions and answers