This chapter describes how to install and test the optional modules.
• Installing the MSR module on page 69
• Testing the MSR module on page 70
• Installing the RFID reader/writer module on page 73
• Testing the RFID reader/writer module on page 74
• Installing the 1D Barcode Scanner module on page 76
• Testing the 1D Barcode Scanner module on page 77
• Installing the 2D Barcode Scanner module on page 80
• Testing the 2D Barcode Scanner module on page 81
Installing the MSR module
Refer to the following to install the MSR module.
1. Turn off the device.
2. Remove the two screws on the
top cover.
3. Remove the top cover.
4. Connect the MSR module to
slot A of the OT-110 as shown.
5. Fix the MSR module with two
screws as shown.
INSTALLING THE OPTIONAL MODULES
CHAPTER 4
Slot A
69