Table of Contents
Advertisement
WLAN tab
In the WLAN control panel, you can set up WLAN related functions.
Item
1
This block allows you to turn WLAN on/off.
2
This feature allow you to set the WLAN roaming. When the signal strength of the old access
point drops below the threshold setting value, the device will attempt to connect to the new
access point.
3
This bar shows the strength of current signal.
4
Check this box to enable WLAN when device boots up.
5
Whenever device attempts to connect to a wireless network and fails, there is a delay before
it attempts to connect again. To change this value, please enter a number between 1 and 600
seconds.
32
C H A P T E R 2 U S I N G T H E D E V I C E
Description
1
2
3
4
5
Advertisement
Table of Contents
