Setting Dar Fon Battery Gaugeic - Partner OT-110 User Manual

Setting DAR FON BAT2200 Battery Gauge IC
This section describes how to setup the Gauge IC for DAR FON BAT2200 battery.
ATTENTION
1. Please contact us to request
the "OT-110_Set Gauge IC
For DAR FON BAT2200
BATTERY(3.5).exe" file.
2. Copy the file to a Micro SD
card.
3. Insert the Micro SD card to your
OT-110.
4. Power on, Tap
→ Windows Explorer.
5. Double tap SD Card icon.
6. Double tap OT-110_Set Gauge
IC For DAR FON BAT2200
BATTERY(3.5) icon.
7. Tap SET button.
8. When prompt done, tap OK.
9. Tap → Settings → Control
Panel.
10. Double tap the Setting Manager
icon.
11. In Battery tab, set Gauage
suspend point (system 0%) to
0%
12. Tap Set button.
13. Switch off "System 0% suspend
switch" by taping the Off button.
14. Run out of battery and fully
charge and discharge several
times to calibrate battery.
Run this software only when the battery consumption occurs
abnormally fast.
This software applies only to the battery model BAT2200.
→ Programs
(You can tap Get buutton to
make sure the value is 0%)
37