Plug In Extender Near Router/Home Hotspot - BT Home Hotspot 500 User Manual

1 Plug in extender near
your router
Plug one end of the ethernet cable into a spare ethernet socket on your router/hub.
1
2 Plug the other end into the extender.
IMPORTANT: to work properly, extender and hotspot must be plugged directly into
the wall socket and not into extension leads.
Plug the extender directly into a wall power socket. Make sure the socket's switched on.
3
2 Plug in your home hotspot
Plug the hotspot directly into a wall power socket near the device you want
1
to connect. Make sure the socket's switched on.
2 Check the On/Off button on the top of the hotspot is on.
Wait for connection to complete. Give it a couple of minutes. If everything's okay,
3
the Power and Data indicators on both adaptors will light up.
1
See Connection help overleaf if the Data indicator doesn't light up on the extender
or the hotspot.
1
2
2
3
On Off
3