Iridium GO! User Manual page 21

Inserting the SIM card
1. Remove the battery cover with a flat blade screw-driver, or a small coin.
2. Slide SIM card-holder toward the hinges, and lift to open.
3. Insert SIM card into slot.
4. Close card-holder, and slide it away from the hinges to lock.
Installing the battery
1. Install the battery with the gold battery contacts facing down over the four connector contacts.
2. Replace the battery cover, and ensure screws are firmly tightened to maintain correct water
resistant seal.
4
Charging your battery
1. Open the USB cover, and firmly plug in the USB cable.
2. Connect the USB cable to the Universal AC Travel Charger, or Car Charger.
3. When charging is complete, remove the USB cable, and close the USB cover to maintain water
resistant seal.
NOTE:
1. The battery will automatically stop charging in very low or high temperatures. (Standard Li-Ion charging range between 0°C to
45°C battery temperature).
2. Charge time of 4 to 5 hours using the included AC Travel or Car Charger.
3. Iridium GO! can be charged from the USB port of your PC, laptop or USB hub (500mA port or higher). Please use the supplied USB
cable. Charging in this method will take longer compared to using the included chargers.
16
Iridium GO! User Manual