Table of Contents
Advertisement
Quick Links
IM3010
01/2010
Rev. 4
LINC FEED 34 & 35
OPERATOR'S MANUAL
MANUALE OPERATIVO
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'UTILISATION
BRUKSANVISNING OG DELELISTE
GEBRUIKSAANWIJZING
BRUKSANVISNING
INSTRUKCJA OBSŁUGI
KÄYTTÖOHJE
MANUAL DE INSTRUÇÕES
LINCOLN ELECTRIC BESTER S.A.
ul. Jana III Sobieskiego 19A, 58-260 Bielawa, Poland
www.lincolnelectric.eu
Advertisement
Table of Contents
Related Manuals for Lincoln Electric LINC FEED 34
Summary of Contents for Lincoln Electric LINC FEED 34
- Page 1 IM3010 01/2010 Rev. 4 LINC FEED 34 & 35 OPERATOR’S MANUAL MANUALE OPERATIVO BEDIENUNGSANLEITUNG MANUAL DE INSTRUCCIONES MANUEL D'UTILISATION BRUKSANVISNING OG DELELISTE GEBRUIKSAANWIJZING BRUKSANVISNING INSTRUKCJA OBSŁUGI KÄYTTÖOHJE MANUAL DE INSTRUÇÕES LINCOLN ELECTRIC BESTER S.A. ul. Jana III Sobieskiego 19A, 58-260 Bielawa, Poland...
- Page 2 été conçu en conformité avec les normes: og er produsert og testet iht. følgende standarder: EN 60974-1, EN 60974-5, EN 60974-10 (2006) Paweł Lipiński Operations Director LINCOLN ELECTRIC BESTER S.A., ul. Jana III Sobieskiego 19A, 58-260 Bielawa, Poland 12/05...
- Page 3 été conçu en conformité avec les normes: og er produsert og testet iht. følgende standarder: EN 60974-1, EN 60974-5, EN 60974-10 (2006) Paweł Lipiński Operations Director LINCOLN ELECTRIC BESTER S.A., ul. Jana III Sobieskiego 19A, 58-260 Bielawa, Poland 12/05...
- Page 4 07/06 Do not dispose of electrical equipment together with normal waste! In observance of European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) and its implementation in accordance with national law, electrical equipment that has reached the end of its life must be collected separately and returned to an environmentally compatible recycling facility.
- Page 5 Per ogni futuro riferimento, compilare la tabella sottostante con le informazioni di identificazione equipaggiamento. Modello, Codice (Code) e Matricola (Serial Number) sono reperibili sulla targa dati della macchina. VIELEN DANK! Dass Sie sich für ein QUALITÄTSPRODUKT von Lincoln Electric entschieden haben. •...
- Page 6 Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this equipment. Read and understand the following explanations of the warning symbols. Lincoln Electric is not responsible for damages caused by improper installation, improper care or abnormal operation.
-
Page 7: Installation And Operator Instructions
CYLINDER MAY EXPLODE IF DAMAGED: Use only compressed gas cylinders containing the correct shielding gas for the process used and properly operating regulators designed for the gas and pressure used. Always keep cylinders in an upright position securely chained to a fixed support. Do not move or transport gas cylinders with the protection cap removed. -
Page 8: Routine Maintenance
Maintenance WARNING For any maintenance or repair operations it is recommended to contact the nearest Technical Service Center or Lincoln Electric. Maintenance or repairs performed by unauthorized service centers or personnel will null and void the manufacturer's warranty. The frequency of the maintenance operations may vary in accordance with the working environment where the machine is placed. - Page 9 A. Non Synergic Welding Mode (CV Mode) Description: During Non Synergic (CV Mode) welding, the pre-setting of the welding parameters (Wire Feed Speed and Voltage) are independent from one another. Set-Up: LF 34: This machine is always in Non-Synergic Welding Mode. LF 35: While pressing the Prog button, rotate the left knob until "NON SYNERGIC"...
- Page 10 B. Synergic Welding Mode (LF 35 only) Description: During Synergic welding, the wire feeder determines the optimal voltage characteristics based upon the selected wire type and diameter. Only the wire feed speed needs to be regulated by the user. The user can then adjust the height of the arc using the right knob.
- Page 11 C. Selecting Welding Parameter Description: The following options can be regulated using the Select button and the procedure below: 2/4 Step Trigger, Burnback, Run-In, Crater, Hot/Soft Start, Pre-Flow and Post-Flow. Press SELECT button KNOB 1: KNOB 2: Turn Right ( ) or Left ( ) Turn Right( ) or Left ( ) 2 strokes: Keep trigger pushed during welding.
- Page 12 D. Memory Function - Saving, Reading and Erasing (LF 35 Only) Description: The Memory function can be used to recall up to 10 specific sets of welding parameters defined by the user. Once the welding parameters have been defined, the following steps can be taken to write these parameters to memory. Press the MEM button KNOB 1: Button "ENTER"...
- Page 13 E. Memory Function - Recalling Memory (LF 35 Only) Description: The saved Memory configurations can be recalled. Set-Up: While pressing the Prog button, rotate the left knob until "RECALL MEMORY" appears on the display. Selection: Release the Prog button, then rotate the left knob to scroll through the saved memory configurations.
- Page 14 F. Memory Function - Locking / Unlocking Memory (LF 35 Only) Description: The Memory values can be locked / unlocked with a 4-digit code. Press Mem & Enter Button Enter Knob 2: Turn Right ( ) or Left ( ) Confirm NO to Exit this menu Lock Confirm YES to Enter the menu:...
-
Page 15: Configuration Menu
G. Configuration Menu Description: This hidden menu allows you to change the Machine Configuration. To enter the set-up menu, press the Select pushbutton and at the same time Switch ON the machine. Knob 1: Knob 2: Turn right or left Turn right or left Choice of the configuration Choice... -
Page 16: Error Messages
Lincoln Electric. Before installing the machine, the operator must check the work area for any devices that may malfunction because of electromagnetic disturbances. -
Page 17: Technical Specifications
Technical Specifications INPUT VOLTAGE WIRE FEED SPEED 42 Vac 1.5-20 m/min RATED OUTPUT AT 40°C Duty Cycle Output Current (based on a 10 min. period) 100% 385 A 500 A OUTPUT RANGE Welding Current Range Maximum Open Circuit Voltage 5-500 A 113 Vdc or Vac peak WIRE SIZES (mm) Solid wires...