Table of Contents
Advertisement
Drying
Start the drying program
0 Press the button START/PAUSE.
The drying programme begins. You can check the
progress of the drying procedure in the programme
progress display.
Removing laundry or loading laundry when necessary
You can interrupt the drying process at any time to remove some of the
laundry or to add more laundry.
0 Open the door.
1
Caution! The laundry and the drum may be hot.
0 Remove or add more laundry.
0 Close the door.
0 Press the START/PAUSE button to resume the
drying process.
End of the drying process
The cooling phase starts shortly before the end of the drying process:
The heater is switched-off during this phase. After the cooling phase
the END and CREASE GUARD display is illuminated. You can now
remove the washing from the tumble dryer.
The crease guard phase follows automatically after the drying process.
For 30 minutes the drum rotates intermittently. This keeps your laundry
loose and crease-free.
If you have pressed the AUDIBLE SIGNAL button, an acoustic signal is
sounded intermittently during this phase.
You should remove the washing at the latest towards the end of the
anti-crease phase to avoid creasing.
Removing the laundry
0 Open the door and remove the laundry.
18
Hide quick links:
Advertisement
Table of Contents
