Start The Drying Program; Removing Laundry Or Loading Laundry When Necessary; End Of The Drying Process; Removing The Laundry - AEG LAVATHERM 57520 Operating Instructions Manual

Drying

Start the drying program

0 Press the button START/PAUSE (START/PAUZE ).
The drying programme begins. You can check
the progress of the drying procedure in the pro-
gramme progress display.

Removing laundry or loading laundry when necessary

You can interrupt the drying process at any time to remove some of the
laundry or to add more laundry.
0 Open the door.
1
Caution! The laundry and the drum may be hot.
0 Remove or add more laundry.
0 Close the door.
0 Press the START/PAUSE (START/PAUZE ) button
to resume the drying process.

End of the drying process

The cooling phase starts shortly before the end of the drying process:
The heater is switched-off during this phase. After the cooling phase
the END/CREASE GUARD (EINDE/ANTI-KREUK) display is illuminated.
You can now remove the washing from the tumble dryer.
The crease guard phase follows automatically after the drying process.
For 30 minutes the drum rotates intermittently. This keeps your laundry
loose and crease-free.
If you have pressed the AUDIBLE SIGNAL (ZOEMER) button, an acoustic
signal is sounded intermittently during this phase.
You should remove the washing at the latest towards the end of the
anti-crease phase to avoid creasing.

Removing the laundry

0 Open the door and remove the laundry.
18