Something Not Working - AEG LAVATHERM 37720 electronic Operating Instructions Manual

Something not working?

If the tumble dryer is not working correctly please carry out the follow-
ing checks before calling an engineer.
Symptom
The tumble dryer does not
work
The results are unsatisfactory
The drying result is unsatis-
factory; the washing is still
damp.
The drying process takes
unusually long
Possible cause
The appliance is not
plugged in
The fuse has blown
The START/PAUSE button
has not been pressed
No program has been
selected
The door is not properly
closed
The wrong program has
been selected
Fluff filter blocked
The tumble dryer has
been overloaded
Laundry not sufficiently
spun prior to tumble
drying
A residue may have
formed on the drum
interior, blocking the
sensors
The conductivity of the
water in your locality dif-
fers from the standard
setting of the appliance.
The vent hose may be
obstructed
Fluff filter is blocked
Something not working?
Solution
Plug in the appliance
Check the fuse
Press the START/PAUSE
button
Select the required
program
Close the door
Select a different
program
Clean the fluff filter
Observe the maximum
loads stated for each
program
Ensure the wash load is
well spun before tumble
drying
Clean the inside of the
drum with white vinegar
Reprogram the standard
setting, eg. H0 instead of
H1, for dryer washing (see
chapter "Programming
Possibilities".
Check the vent is not
blocked or squashed
Clean the fluff filter
25