Dip Switches Setting; Pv037-Lsk/Pv057/Pv058 Dip Switches Setting - Cermate Technologies PV035-TST Installation Manual

DIP switches setting

PV037-LSK/PV057/PV058 DIP Switches setting

SW1
ON Not dis play s ys tem m enu, go to ON-LINE c om m unic ation after
turns on.
OFF Dis play s ys tem m enu when turns on. Not go to ON-LINE
c om m unic ation.
Em ergenc y rec overy the HMI BIOS to default value.
SW2
ON Set to default OS vers ion or c us tom ized OS vers ion.
OFF Set to default BIOS vers ion B.
HMI operation mode (Supports special functions for customized BIOS
SW3 SW4
version)
OFF OFF Res erved
ON OFF To exec ute HMI Com m unic ation tes ting program (SW 1,2 m us t
s et to Off)
OFF ON To exec ute Key adjus tm ent program or Touc h adjus tm ent
program (SW 1,2 m us t s et to Off)
ON ON To exec ute HMI applic ation program
SW5 Res erved
ON Res erved
OFF Res erved
Res erved
SW6
ON Res erved
OFF Res erved
***The PV037/PV057 has a BIOS password recovery system to prevent damage when
missing password. When you forget the password, which has been set to the HMI, this
HMI can execute RUN AP/Calibrate operation but cannot execute BIOS/Download
AP/Clear SRAM operations. When the users want to download new AP without
password, please set all DIP switches to off (SW1-6=Off), When turns on HMI again,
the HMI will display the clean all AP and old password screen. After proceeding this
procedure, the HMI can be operated normally again.
For some models of the PL037-LSK/PL037-LST/PV037-LNT/PL035-TST/PV035-
TST/PV035-TNT/GD057-LST/GD058-TST there are no dip switch.
System Menu
1 2 3 4 5 6
A-14
PanelVisa