Vdwall LedSync850M User Manual page 23

LedSync850M User Manual
When the device is successfully connected, the software will
automatically detect the current selected input signal and the
signal will be marked with blue indicator. If the indicator is always
on, it means the current selected signal is valid, if the indicator
flickers, it means there is no valid input signal.
Click another key to switch the input signal, the message of the
new selected signal will be displayed on the information bar and
also on the LCD screen of the processor.
5) Function
Full display/part display (BYPASS): when display a single image and the
selected signal is
means Bypass is started successfully.
Automatic calibration of output image from VGA:
6) Brightness
The highest value is 64 and the lowest is 0.
7) Cut/Fade
Cut/Fade consist of seamless switching （Cut） and fade in/fade out
www.cnledsourcing.com
DVI/VGA, click
23 / 31
, if the indicator is on, it