Vdwall LedSync850M User Manual page 14

LedSync850M User Manual
4 Version Information
5 Factory Settings
etup menu
Enter setup: during operation, press "Setup" and then the knob (OK)
to reach the first item.
Quit setup: during setup, press "Setup" to quit directly.
In setup mode, the functions of the knob and other three keys are:
Keys
Turning speed
Knob
Turn anticlockwise
Turn clockwise
Press
↑
↓
Setup
After entering the setup mode, settings will be displayed on the LCD
screen:
1
As the above shows, there are 5 areas on the LCD screen:
www.cnledsourcing.com
8
Sharpness
9 Version Number
10 ADC Calibration
11 Bias
12 VGA output
13 ByPass Sel
14 Device init
4 ：
Out_Hori_Start
200 ？
3
图 4
14 / 31
Functions
The step value is in proportion to
the turning speed.
To decrease the value or select the
previous value.
To increase the value or select the
next value.
To save the adjustment or the
selected value.
To switch to the previous item.
To switch to the next item.
Quit the setup menu.
2
4
1. E
nt
er
s