Table of Contents
Advertisement
1-2 Back panel introduction
[4Channel]
[8Channel]
[16Channel]
1.[RS485, Relay Output, Sensor Input]
RS485, for connection to PTZ cameras.
16 sensor inputs and 1 relay output.
2.[VGA Output]
Connection to a VGA monitor or TFT LCD.
3.[ETHERNET]
Connection to Ethernet device.
4.[RS-232C]
Connection to PC or other DVR control devices.
5.[1~16 Camera Input/LOOP Output]
CAMERA IN- channel 1~16 camera input.
LOOP- channel 1~16 camera loop out
6.[Monitor / SPOT Output]
MONITOR- Connection to monitor.
SPOT- second monitor output. Once alarm or motion is triggered, it will pop up automatically or display in
sequence according to the set up.
7.[Power Input]
DC power input (DC12V)
8.[Power Switch]
Power ON/OFF
9.[Audio Input/Output]
Audio input 1~4 channel and Audio output 1 channel.
JPEG2000 Stand alone DVR User Guide
- 8 -
Advertisement
Table of Contents
