Nokia 6800 User Manual page 100

• Homepage - Key in the homepage address of the WAP service that you want
to use, and press OK.
• Session mode - Select Permanent or Temporary.
• Connection security - Select On or Off.
• When the connection security is On, the phone tries to use a secure connection
with the WAP service. If a secure connection is not available, the connection
will not be made. If you wish to connect anyway, with a non-secure connection,
you must set the connection security to Off.
• Data bearer - Select GSM data or GPRS.
• Bearer settings - Settings for the selected bearer. See below for more information.
For pricing, connection speed and other information, contact your network
operator or service provider.
SETTINGS WHEN GSM DATA IS THE SELECTED DATA BEARER
Dial-up number - Key in the phone number and press OK.
•
• IP address - Key in the address, and press OK. You obtain the IP address from
your network operator or service provider.
• Authentication type - Select Secure or Normal.
• Data call type - Select Analogue or ISDN.
• Data call speed - Select the speed you want to use, or select Automatic.
Automatic is available only if the current selected data call type is Analogue.
The actual data call speed depends on the service provider.
• Login type - Select Manual or Automatic.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
• Display terminal window - Select Yes, if you want the server to perform user
authentication when you access intranet sites during a dial-up connection.
SETTINGS WHEN GPRS IS THE SELECTED DATA BEARER
• GPRS access point - Key in the access point name and press OK.
• An access point name is needed to establish a connection to a GPRS network.
You obtain the access point name from your network operator or service provider.
• IP address - Key in the address and press OK. You obtain the IP address from
your network operator or service provider.
Nokia 6800 User Guide
93
Menu functions
Copyright © Nokia 2003