QT -72HW Instruction Manual page 6

instructions.
Overloading: Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
Object and Liquid Entry: Never put objects of any kind on to or into this product through
openings as they may touch dangerous voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the product.
Servicing: Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards and will void your warranty. Refer all
servicing to qualified service personnel.
Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to
qualified service personnel:
a) when the power-supply is damaged
b) if liquid has been spilled
c) if the product has been exposed to rain or water
d) if the product does not operate normally
e) if the product has been dropped or damaged in any way (voids warranty)
f) when the product exhibits a distinct change in performance.
Heat: The product should be kept away from heat sources such as a radiator, heat register,
stove, or other products that generate heat.
Replacement Parts: Unauthorized substitutions when service this product may result in fire,
electric shock, or other hazards. Make sure your service technician has used parts specified by
the manufacturer.
Energy Save: To save energy, unplug the USB power adapter when not in use. The USB power
adapter does not have a power switch, so you must unplug the USB power adapter from the
electrical socket when not in use to avoid wasting power. The device should remain close to
the electrical socket while charging.
File and Application Download: Files you download from the Internet can include viruses that
will damage your device. To reduce this risk, only download files from sources you trust.
The descriptions in this manual are based on the default settings of your device. The images
and screenshots used in this manual may differ from the actual product.
If the device receives an unstable power supply while charging, the touch screen may not
function. If this happens, unplug the USB cable from the device.
The device may heat up while charging. This is normal and should not affect your device's
lifespan or performance.
The Android logo, Google™, Google Maps™, Google Mail™, YouTube™, Google Play™ Store,
and Google Talk™ are trademarks of Google, Inc.
Wi-Fi
®, Wi-Fi Protected Setup™, Wi-Fi Direct™, Wi-Fi CERTIFIED™, and the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance
ENGLISH
Google Play
The tablet comes with a built-in rechrgeable ba ery that
should be charged fully prior to first use. Connect the AC
adapter to your Tablet via the DC input on the side of the
tablet or connect USB cable on the USB port (illustrated
below). Disconnect the tablet when its fully charged.
The battery which is initially 50% charged can be used
immediately.
Please fully charge/discharge the battery (15% or below)
for the first three times to get maximum capacity.
If the battery is completely discharged, please allow the
at least 10-15 minutes to recharge prior to turning it on.
CHARGE THE BATTERY:
During charging, the battery indicator shows an thunder
icon. If the device is switched off during the charge, there
will still be a charge indication on the screen that shows
the unit is still being charged. If the device is overused
when the battery is low, it might take some time to
appear the charging icon.
During charging, the battery , the device and the charger will get hot. This is normal.
Unplug the charger from the AC electrical outlet and disconnect the wiring between the
tablet and the charger after charging.
Attention: Charge the phone in a well ventilated place in which the temperature is from-
10°C to +55°C. Use the charger provided by the manufacturer only. The use of
unconfirmed charger may lead to dangers and violate the manufacturer's warranty
clause.
3
800x480
QT 7
Google Play
1,000,000
, Instruc on Manual and Warranty card
DC IN
USB
4
OR