Advertisement
Table of Contents
- 1 Step 1: Disconnect Power from Reach-In
- 2 Step 2: Recover Refrigerant
- 3 Step 3: Remove Armaflex Insulation from Existing Expansion Valve
- 4 Step 4: Loosen Flare Nuts from Expansion Valve
- 5 Step 5: Unsweat Flare Nuts’ Extensions at Solder Joints
- 6 Step 6: Wrap New TXV with Wet Cloth
- 7 Step 7: Slip Rubber Boot over TXV
- 8 Step 8: Evacuate and Weigh in Proper Charge
- Download this manual
7625573 FLARE NUT TXV REPLACEMENT (Z200)
Installation Instructions
1. Disconnect power from reach-in.
2. Recover refrigerant.
3. Remove armaflex insulation from existing expansion valve.
4. To remove expansion valve, loosen flare nuts from expansion valve.
5. Unsweat flare nuts' extensions at solder joints.
6. NOTE: WRAP NEW TXV WITH WET CLOTH TO PREVENT OVERHEATING VALVE. Slip copper extensions
into TXV and swaged ends onto existing lines and sweat into place.
7. When TXV is cool, slip rubber boot over TXV and glue seam together.
8. Evacuate and weigh in proper charge.
Manitowoc Ice, Inc.
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879
8009693
Web Site -
www.manitowocice.com
Rev. 07/06/99
Advertisement
Table of Contents
Need help?
Do you have a question about the 7625573 and is the answer not in the manual?
Questions and answers