Yamaha A-S1100 Owner's Manual page 6

CONTROLS AND FUNCTIONS
Controls and functions
■ Front panel (pages 6 to 9)
1 2 3
1 STANDBY/ON, OFF switch
Turns on or off this unit.
STANDBY/ON (upper position): With this switch
position, pressing the p AMP key on the remote
control toggles the power between STANDBY and
ON.
OFF (lower position): The power of this unit is
turned off.
Notes
• When you turn on this unit, it will take a few seconds
before this unit can reproduce sound.
• If you disconnect the power cable from the AC outlet and
connect it again when this unit is in STANDBY mode, the
power of the unit is turned on. If the unit is not to be
operated for a long time, set the STANDBY/ON, OFF
switch to OFF.
2 STANDBY/ON indicator
Lit brightly: Shows that the power of the unit is ON.
Lit dimly: Shows that the unit is in STANDBY mode.
Off: Shows that the power of the unit is OFF.
6
En
4 5 6 7
3 PHONES jack
8 9
Connects your headphones.
Notes
• When headphones are plugged in:
– Both speaker sets connected to the SPEAKERS L/R CH
terminals are turned off.
– No signals are output at the PRE OUT jacks.
– You cannot select MAIN DIRECT as the input source.
• If headphones are plugged into the PHONES jack while
MAIN DIRECT is selected as the input source, no audio is
output at the PHONES jack.