Using As A Wired Headphone; Safety And Care; Specifications; Troubleshooting - Meelectronics Matrix 2 AF62 User Manual

USING AS A WIRED HEADPHONE

The Air-Fi Matrix2 comes with a 3.5mm audio jack on the left ear cup and
an audio cable for wired use. This allows use with in-flight entertainment
devices, devices that don't have Bluetooth or aren't paired, or when the
battery is depleted.
The Air-Fi Matrix2 can be used wired while still connected via Bluetooth to
another device. Bluetooth audio takes precedence over wired audio; if a
Bluetooth device is connected while listening to wired audio, wired audio
will partially mute when audio is transmitted via Bluetooth. Wired audio will
resume approximately 10 seconds after the Bluetooth transmission ends.

SAFETY AND CARE

a) When not in use, power the headphones off and store in the included
protective pouch.
b) Clean with a soft cloth, damp with diluted soap water solution if
necessary. Never use chemical cleaners.
c) There are no user replaceable/reparable parts in the headset.
Disassembling it will void your warranty.
d) Do not expose the headphones to liquids. If submersed in water, do not
turn the device on until completely dried.
Note: liquid submersion voids the warranty.
e) Battery performance will be severely decreased when stored in extreme
temperatures: below -10°C/14°F or above 45°C/113°F.

SPECIFICATIONS

See the Air-Fi Matrix2 product page at www.meelec.com for product
specifications.

TROUBLESHOOTING

Please visit www.meelec.com/bluetooth for the troubleshooting information

WARRANTY

The Air-Fi Matrix2 is covered by a 1-year manufacturer warranty. For more
information, visit www.meelec.com/warranty.
8