Windows® Phone is a registered trademark of Microsoft Corporation in the United States and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MEElectronics is under license. Other trademarks and trade names are those of their respective owners.
QUICK START GUIDE 1. CHARGE THE METRO2 BEFORE FIRST USE Open the charging port cover on the right ear piece and plug in the micro-USB charging cable into the Metro2 and a powered USB port. (See Page 3 for more information) 2.
PRODUCT OVERVIEW Bluetooth Stereo Earphones Stabilizer fins, 1 pair LED indicator light Small / medium / Microphone large ear tips Volume up / previous Cable clips, 1 pair song button Charging port cover Multifunction button Micro-USB Volume down / charging port next song button...
CHARGING *** You must completely charge the headset before the first use *** Open the charging port cover on the right ear piece and plug in the micro-USB charging cable into the Metro2 and a powered USB port. The red indicator light will stay on while charging and turn off when charging is complete.
POWER ON/OFF FUNCTIONS OPERATION TONE Power on Press and hold button for Four increasing tones about 4 seconds until the blue indicator light flashes Power off Press and hold button Four decreasing tones for about 4 seconds until red indicator light flashes Note: In order to save power, the headset will power off automatically if not connected within 5 minutes of being turned on.
PROPER WEAR AND FIT 1. INSTALLING FINS, EAR TIPS AND CABLE CLIPS a) Install stabilizer fins on the headset and rotate to find a suitable position as shown: b) Choose the eartips best suited for your ear size. Wear as follows: c) Configure the cable management clips to reduce cable slack for a more secure and comfortable fit.
Page 8
PROPER WEAR AND FIT (Continued) 2. CHANGING EAR TIPS The Metro2 is an in-ear headphone and requires the ear tips to seal with your ear canal. An airtight seal between the ear tip and ear canal is important for getting the best sound. Three sizes of ear tips are included to help you achieve the best fit and comfort.
PAIRING WITH BLUETOOTH DEVICES Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled audio device. *** It is only necessary to pair your Metro2 once with each device *** 1. PAIRING a) Open the Bluetooth menu (see sections 2 through 4 below) on the device you wish to pair.
PAIRING WITH BLUETOOTH DEVICES (Continued) 3. LOCATING THE BLUETOOTH MENU ON ANDROID ™ PHONES AND TABLETS a) On your device, go to Settings menu b) Select Bluetooth (Bluetooth is under the Wireless & Networks menu in older Android devices); if Bluetooth is not on, turn it on. c) Select “Search for Devices”...
MULTIPOINT Multipoint allows two Bluetooth devices to be connected to the Metro2 simultaneously. 1. TURNING ON MULTIPOINT: MULTIPOINT IS OFF BY DEFAULT. ENABLE MULTIPOINT AS FOLLOWS: a) Put the Metro2 in standby mode (turned on but with no devices connected to it). Bluetooth may need to be turned off temporarily on nearby devices so that they do not connect to the Metro2 b) Long press and + buttons in standby mode, and release them when...
MULTIPOINT (Continued) 4. TURNING MULTIPOINT OFF We recommend keeping multipoint off if you don’t use this feature, which will result in the best connectivity and battery life. Disable multipoint as follows: Long press and — buttons in standby mode (see Section 1a on Page 9 for standby mode instructions) and release them when you hear four beeps of decreasing tone.
Page 13
PHONE FUNCTIONALITY & CONTROLS (Continued) 2. DIALING FUNCTION OPERATION TONE Voice dial / Siri Short press and + button Short tone simultaneously Redial the last Long press for 2 seconds Two decreasing tones number 3. IN-CALL CONTROLS FUNCTION OPERATION TONE Volume up Short press + button Short tone when maximum...
CONTROLLING MEDIA PLAYBACK FUNCTION OPERATION Volume up Short press + button Volume down Short press — button Previous track Long press + button Next track Long press — button Pause Short press button Play Short press button Notes: • The Metro2 will beep when trying to adjust the volume above or below the maximum or minimum settings.
INDICATOR LIGHTS AND TONES (Continued) STATUS INDICATOR LIGHTS (LED) TONE Connected with a Blue LED flashes every 4 Single tone at time device seconds of connection Incoming call or Blue LED flashes continuously making a call Call in progress Blue LED flashes once every 2 seconds Low battery Red LED flashes instead of...
CLEANING INSTRUCTIONS a) Remove the ear tips and the stabilizer fins from the earphones b) Take a cotton swab that is either dry or has been dampened by a small amount of rubbing alcohol or soapy water c) Swab around the nozzle of the earphone d) Swab the ear tip including the inside of the eartip e) Swab the inside of the stabilizer fin ring Note: Ear tips and stabilizer fins can also be submerged fully in rubbing...
Need help?
Do you have a question about the AF72 and is the answer not in the manual?
Questions and answers