Recharging With The Dc Charging Cable - Duracell DRPP300S1 Owner's Manual

4. Plug the AC charger into a standard AC wall outlet.
5. While the Duracell
Battery Status LED is red. If the Duracell
is completely discharged, a typical recharge may take
up to 24 hours. When fully charged, the Battery Status
LED changes to green and the Duracell
ready to use.
Important: The 24-hour charging time for the Duracell
Powerpack assumes that there is 120 V at the AC wall
outlet. If the voltage is less than 120 V AC, it may take
more than 24 hours to fully recharge the Duracell
Powerpack. If, after 24 hours of charging, the Battery
Status LED is still red, continue to charge the unit for
another 12 hours. The Duracell
for use even if the Battery Status LED remains red.
Once the Duracell
voltage and current automatically reduces to a maintenance level
and the Duracell
to the AC charger. If your utility power is interrupted, the charging
process automatically restarts when power returns.

Recharging with the DC Charging Cable

Using the DC charging cable, the Duracell
recharged while you drive your vehicle.
Important: Although the charge regulation circuitry in the
Duracell
method, most vehicle voltage regulators will ensure that the
Duracell
Note: The Battery Status LED will not illuminate when the
Duracell
cable.
®
Powerpack is fully charged, the charging
®
Powerpack may be left permanently connected
®
Powerpack does not operate with this charging
®
Powerpack is not overcharged.
®
Powerpack is recharged using the DC charging
®
Powerpack is recharging, the
®
Powerpack will be ready
®
24
®
Powerpack
®
Powerpack is
®
Powerpack can be
®