Using Duracell Powerpack 300 For The First Time; Recharging With The Ac Charger - Duracell DRPP300S1 Owner's Manual

Using Duracell
the First Time
Important: Prior to operating your AC appliance or 12
V DC appliance, ensure that the battery of the Duracell
Powerpack is fully charged. If the battery has been fully
discharged, recharging with the AC charger may take up to
24 hours.

Recharging with the AC Charger

Note: The Fuel Gauge is only accurate when the Duracell
Powerpack has been disconnected from all appliances and
all charging sources for 15 minutes.
Recharging with the AC charger is a true "plug-in-and-
forget" charging method. We recommend leaving the AC
charger connected when the Duracell
use.
CAUTION
Do not operate AC or DC appliances with the Duracell
Powerpack while the Duracell
recharged with the AC charger. The AC charger may
be permanently damaged if AC appliances or 12 V DC
appliances are operated while the AC charger is connected.
To recharge with the AC Charger:
1. Disconnect any 12 V DC appliances from the DC power
outlets.
2. Disconnect any AC products from the Duracell
Powerpack and turn the AC Power ON/OFF switch to
OFF.
3. Insert the AC charger cable end into the AC charger
input socket located under the red jump-starting clamp.
®
Powerpack 300 for
®
Powerpack is being
8
®
Powerpack is not in
®
®
®
®