Advertisement
Installing grip
Attach the grip onto the grooves in the
tool side and secure with the two screws.
WARN I NG
:
DO NOT USE WITHOUT GRIP.
Hook
When using an extension cord, secure it
t o
the tool's cord with the hook provided.
Attach the hook about 100-200 mm
(4"-
8") from the extension cord connector.
This will help prevent unintentional discon-
nection.
Switch action
To prevent the trigger from being acciden-
tally pulled,
a
lock-off button is provided
as
a safety feature.
To start the tool, press the lock-off button
in and pull the trigger.
Release
the trigger
t o
stop.
Power cord
I
1
I
Cord connector
1
Extension cord
CAUTION
:
Before plugging in the tool, always check to
see
that the trigger switch actuates properly
and returns to the "OFF" position when released.
4
Advertisement
