Advertisement
Total Length of
Cord
in Feet
25
50
100
AWG Size of Cord
18
1
16
16
-
I
Contact Makita Authorized or Factory Service Center if a proper extension
cord cannot be found.
15.
Inspect blades periodically and replace before operation if damaged.
16. Hold the tool firmly with both hands.
17. Do not leave the tool running. Operate the tool only when hand-held.
18.
Attention! Do not expose this tool t o rain.
19.
Be cautious not t o cut through the supply cable while trimming. Pull plug
20.
When not
in
use, be sure t o cover the blades with the blade guard.
The tool must not be left outdoors and
it
must not be used when wet.
immediately if the supply cable be damaged or cut.
150
14
VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate o f the tool. A power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY t o the user - as well as damage t o
the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using
a
power source with
voltage less than the nameplate rating is harmful
to
the motor.
SAVE THESE INSTRUCTIONS.
3
Advertisement
