Advertisement
g
the film
Form the upper loop, and pass the film
between the guides 1 and 4 at the gate.
.,Hold the film in this position and bring
the lens-holder back into place gently.
Place the left index finger just under
the automatic loop-former 5 and form
the lower loop, then guide the film
over the
lower sprocket guides 7
with the right hand, and pull on it
slightly in the direction shown by the
arrow.
The upper and lower loops
should be roughly the same size.
Pass the film under guide-rollers 9 and
3 and fasten the free end to the core
of the empty take-up spool.
Turn the
latter 'in a clockwise direction so as
to tighten up the film slightly.
7
III
IV
v
(VII
\
Advertisement
