Advertisement
III. Loadin
o
Raise up the upper spool arm 11 intothe
erect position by carrying out move-
ments e and
f
simultaneously.
Place the full spool on the upper spool
spindle. The film unwinds in the direc-
tion shown by the arrow, with the
perforations on the same side as the
slotted spindle tip that keeps the spool
in place.
Open the film gate by swinging the
lens-holder forwards on its hinges.
Place the empty spool on the back
(take-up) spindle 18 and unwind about
30" of film.
Insert the film between
the
upper
sprocket guides 2 by pulling it slightly
in
an
upwardly
direction.
If
the
sprocket teeth do not enter the film
perforations immediately, pull the film
forwards a little.
A slight click tells
when the film is in place.
Advertisement
