WS 8009 - Radio controlled wall clock
Instructions manual
Part A
A1: Radio controlled time
A2: Temperature
A3: Date and day of week
A4: Radio controlled icon
A5: Alarm icon
A6: Humidity
Set up and radio controlled time:
•
Insert 3 x C batteries (not included) by observing the correct polarity signs (+/-) inside the battery
compartment.
•
After inserting the batteries, the clock automatically starts scanning the DCF frequency signal after
new batteries inserted (" " flash on the LCD).
" " flash indicate DCF signal searching.
" " indicate signal received successfully.
"DST" icon will turn on when the DCF have DST signal in it.
•
The clock automatically scans the time signal at 3:00a.m. everyday to maintain accurate timing. For
failed reception, scanning stops (on the LCD disappear) and repeats again at 4:00a.m., 5:00a.m.,
6:00a.m.
•
The clock manually scans the time signal by holding " " (B4) buttons for 2 seconds. For failed
reception in 10 minutes, scanning stops (" " on LCD disappear). And repeats again in the next hour.
e.g. if scanning at 8:20a.m. fail, it will scan again at 9:00a.m.
•
Hold " " (B4) buttons for 3 seconds to stop scanning.
Notes:
•
Remove batteries and then insert batteries again to reset the unit if it does not work properly.
•
Avoid placing the clock near interference sources/metal frames such as computer monitor or TV sets.
•
Buttons will not function while scanning for DCF time signal unless they are well received or stopped
manually.
•
Never use the clock in bathroom or any other area with high humidity
•
The clock loses its time information when the battery is removed.
Manual time setting
Hold "MODE" button (B2) until Hour digit flashes.
1.
Press "+" (B3) or "-" (B4) button to adjust Hour, Minutes, Second, Year, Month/Day sequence, Month,
2.
Date, Weekday Language, Time Zone.
Press "MODE" button (B2) to confirm each setting.
3.
Part B
B1: "SNOOZE" button
B2: "MODE" "SET" button
B3: "+" "12/24H" button
B4: "-" "C/F" button
B5: "ALARM ON/OFF" button
Part D
Wall mount hole
Stand
Battery compartment
Need help?
Do you have a question about the WS 8009 and is the answer not in the manual?
Questions and answers