Advertisement
Switch action
1
To start the tool, simply pull the trigger.
Release
the trigger to stop.
CAUTION
:
Before plugging in the tool, always check
to
see
that the switch trigger actuates pro-
perly and returns to the "OFF" position
when released.
Cutting operation
Grasp the rear handle with your right hand,
the front grip with your left.
Set
the base
plate on the workpiece to be cut without
the blade making any contact. Then turn
the tool on and wait until the blade attains
full speed. Now simply move the tool for-
ward over the workpiece surface, keeping
it
flat and advancing smoothly until the
sawing
is
completed. To
get
clean cuts,
keep your sawing line straight and your
speed of advance uniform.
Rear hand'e
I
Fig. 1
CAUTION
:
Always gently keep the tool moving straight ahead when cutting. Forcing or twisting the
tool will result in overheating of the motor and dangerous kickback, possibly causing
severe injury.
Guide rule
The handy guide rule allows you to do
extra-accurate straigtt cuts. Simply slide
the guide rule up snugly against the side of
the workpiece and secure
it
in position
with the clamp screw on the front of the
base.
It
also makes repeated cuts of uni-
form width possible.
Fig.
16
1J
Advertisement
