Watching Tv - Sony Bravia KLV-37U300A Operating Instructions Manual

Watching TV

Watching TV
1
Press 1 on the TV (top) to switch on the
TV.
When the TV is in standby mode (the 1 (standby)
indicator on the TV (front) is red), press "/1 on
the remote to switch on the TV.
2
Press the number buttons or PROG +/- to
select a TV channel.
To select channel numbers 10 and above using the
number buttons, enter the second digit within two
seconds (available only if "1 Digit Direct" is set to
"Off").
12
GB
1
2
2
Additional operations
To Do this
Press "/1.
Turn off the TV
temporarily
(Standby mode)
Turn off the TV Press 1 on the TV (top).
completely
Adjust the volume Press 2 + (increase)/
- (decrease).
Mute the sound Press %. Press again to restore.
Return to the Press
previous channel
watched (for more
than five seconds)
Note
Even if you press the 1 on the TV (top) to turn it off, a small
amount of current continues to flow. Pull the AC plug out of
the wall jack to turn the TV off completely.
To access Text
Press /. Each time you press /, the display changes
cyclically as follows:
Text t Text over the TV picture (mix mode) t No
Text (exit the Text service)
To select a page, press the number buttons or PROG
+/-.
To hold a page, press
To reveal hidden information, press
Note
Text language displays can be either English, Persian or
French depending on your broadcast signal.
Tips
• Ensure that the TV is receiving a good signal, or some text
errors may occur.
• Some TV channels broadcast a Text service. For
information on the use of the service, select the index page
(usually Text page 100).
• When four coloured items appear at the bottom of the Text
page, Fastext is available. Fastext allows you to access
pages quickly and easily. Press the corresponding
coloured button to access the page.
.
.
.