Sony KLV-32M1 Quick Setup Manual

KLV-32M1

Quick Setup Guide

Please follow the steps to setup your TV:
1 2
zzzzzzzz
Checking the Connecting Your TV

Supplied Accessories

(See reverse side)
If your product is not working properly
DO NOT RETURN TO THE STORE.
For service and technical assistance
Call our Customer Information Service Center (Toll Free):
1-800-222-SONY (7669) for US residents.
1-877-899-SONY (7669) for Canadian residents.
Sony Corporation © 2004
Printed in Japan
1 Checking the
Supplied Accessories
Remote control (RM-Y1107) (1)
and size AA batteries (2)
75-ohm coaxial cable (1)
AC power cord (1)
• Clamp screws (2)
• Operating Instructions (1)
• Quick Setup Guide (1)
• Warranty Card (1)
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by matching the
e
the batteries to the diagram inside the remote control's battery
compartment.
3
zzzzzzzz zzzzzzzz
Running Initial
Setup
2 Connecting Your TV
• Review the following chart to determine which diagram to use to
connect the components in your system:
For these components
or
or
or
or
and on
E
• See the "Cables Required" chart that appears with the diagram to
determine which cables you'll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.
• Turn off and unplug all components before making connections.
• If you are connecting a digital cable box, you'll need a special bi-
directional splitter that's compatible with your cable box. Contact
your cable provider for details.
2-179-084-11(2) Making Video Connections
Your TV includes several types of video inputs. Use the inputs that
are available on your components that provide the best video
performance, as described below.
Best Video
Performance
Connector type
HDMI
(High-Definition Multimedia Interface)
Component video
S VIDEO
Composite video
RF/Coaxial
4
Additional Connections
Programming
For best audio performance, connect your digital audio components
the Remote Control
using either digital optical or digital coaxial audio connections.
Depending on which components are in your system, you may need
to complete additional connections. For example, if you have a
satellite receiver, you'll need to connect the satellite antenna. If you
have an AV receiver, you'll need to connect speakers.
Note
The connection diagrams shown in the reverse side are recommendations only; other
possible solutions may exist. Connections that include an AV receiver can often be very
complex, so check your AV receiver's instruction manual for additional details.
3 Running Initial Setup
1
Press 1 (Power) on the TV.
The Auto Setup menu automatically appears on the screen when
you turn on the TV for the first time.
See reverse
side
2
Press CH+ on the remote control or on the drop-down panel of
A your TV to perform Auto Program.
To open the drop-down panel of your TV, push up the panel door
just under the "v PUSH-OPEN" mark until you hear a click, then
the panel door will open.
B
When all the receivable channels are stored, the "Channel Skip/
Add" menu appears.
C
Auto Program is set to scan cable TV channels by default. To watch
VHF/UHF channels with an antenna, see "To watch VHF/UHF
channels with an antenna" in the operating instructions.
D
If you need to perform Auto Program again
1
Press MENU.
E
2
Press V/v to select (Channel), then press
3
Press V/v to select "Auto Program," then press
F
4
Press .
"Auto Program" appears and the TV starts scanning and
presetting channels automatically. When all the receivable
channels are stored, the "Channel Skip/Add" menu appears.
Using this menu, you can start skipping unwanted channels (see
"To skip channels" in the operating instructions).
5
Press MENU to exit the menu screen.
4 Programming the
Remote Control
The remote control is preset to operate Sony brand video equipment.
Sony Equipment Programmable Code Number
DVD/VCR 601 (Sony Dream System)
SAT/Cable 801 (Sony Satellite Receiver)
If you have video equipment other than Sony brand that you want to
control with the TV's remote control, use the following procedures to
program the remote control.
Note
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
1
Press the DVD/VCR (FUNCTION) and RESET
5
buttons simultaneously, or press the SAT/CABLE
DVD/ SAT/ POWER
MUTING VCR CABLE
(FUNCTION) and RESET buttons simultaneously.
MODE
PICTURE WIDE SLEEP DISPLAY
DVD/VCR and SAT/CABLE buttons flash.
3 2
Press the function button you want to program.
To program a cable box or a satellite receiver
4
TOP MENU FAVORITES MENU
Press SAT/CABLE (FUNCTION).
To program video equipment
Press DVD/VCR (FUNCTION).
3
Enter the three-digit manufacturer's code number
F1
1, 2
F2 using the 0-9 buttons.
TV VIDEO 1/2/3 VIDEO 4 VIDEO 5
4
Press ENT (enter).
5
To check if the code number works, aim the TV's
RESET FREEZE MTS/SAP
GUIDE TV/SAT remote control at the equipment and press DVD/
1
VCR and/or SAT/CABLE (POWER) that corre-
sponds with that equipment. If it responds, the
programming is completed. If not, try using the
other codes listed for that manufacturer.
Tips
• If more than one code number is listed, try entering them one by
one until you come to the correct code for your equipment.
• If you enter a new code number, the code number you
previously entered at that setting is erased.
Manufacturer's Codes
Manufacturer Code
Aiwa* 338, 344
DVD Players
Audio Dynamic 314, 337
Manufacturer Code
Broksonic 319, 317
Canon 309, 308
Sony 751
Citizen 332
General Electric 755
Hitachi 758 Craig 302, 332
Curtis Mathes 304, 338, 309
JVC 756
Daewoo 341, 312, 309
Magnavox 757
Mitsubishi 761 DBX 314, 336, 337
Dimensia 304
Panasonic 753
Emerson 319, 320, 316, 317,
Philips 757
318, 341
Pioneer 752
Fisher 330, 335
RCA/PROSCAN 755
Funai 338
Samsung 758
General Electric 329, 304, 309
Toshiba 754
Go Video 322, 339, 340
Zenith 760
Goldstar 332
Hitachi 306, 304, 305, 338
DVD Changers
Instant Replay 309, 308
Manufacturer Code
JC Penney 309, 305, 304, 330,
314, 336, 337
Sony 765
JVC 314, 336, 337, 345,
Panasonic 766
346, 347
Kenwood 314, 336, 332, 337
DVD/VCR Combo Units
LG 332
Manufacturer Code
LXI (SEARS) 332, 305, 330, 335,
Sony 767 338
Magnavox 308, 309, 310
Zenith 768
Toshiba 773 Marantz 314, 336, 337
Marta 332
Samsung 774
Memorex 309, 335
JVC 775
Broksonic 776 Minolta 305, 304
Mitsubishi/MGA 323, 324, 325, 326
Panasonic 777
.
Multitech 325, 338, 321
HDD/DVD Combo Units
NEC 314, 336, 337
.
Olympic 309, 308
Manufacturer Code
Optimus 327
Sony 770, 771, 772
Orion 317
Panasonic 308, 309, 306, 307
5.1ch DVD AV System
Pentax 305, 304
Manufacturer Code
Philco 308, 309
Sony (DAV) 601, 602, 603, 604 Philips 308, 309, 310
Pioneer 308
AV Receivers
Quasar 308, 309, 306
RCA/PROSCAN 304, 305, 308, 309,
Manufacturer Code
311, 312, 313, 310,
Sony 764
329
Realistic 309, 330, 328, 335,
VCRs 324, 338
Sansui 314
Manufacturer Code
Samsung 322, 313, 321
Sony 301, 302, 303
Sanyo 330, 335
Admiral (M. Ward) 327
Manufacturer Code
Scott 312, 313, 321, 335,
323, 324, 325, 326
Sharp 327, 328
Signature 2000 (M.Ward) 338, 327
SV 2000 338
Sylvania 308, 309, 338, 310
Symphonic 338
Tashiro 332
Tatung 314, 336, 337
Teac 314, 336, 338, 337
Technics 309, 308
Toshiba 312, 311
Wards 327, 328, 335, 331,
332
Yamaha 314, 330, 336, 337
Zenith 331
Cable Boxes
Manufacturer Code
Sony 230
Hamlin/Regal 222, 223, 224, 225,
226
Jerrold, G.I. 201, 202, 203, 204,
205, 206, 207, 208,
218, 222
Oak 227, 228, 229
Panasonic 219, 220, 221
Pioneer 214, 215
Scientific Atlanta 209, 210, 211
Tocom 216, 217
Zenith 212, 213
Satellite Receivers
Manufacturer Code
Sony 801
Dish Network 810
Echostar 810
General Electric 802
Hitachi 805
Hughes 804
Mitsubishi 809
Panasonic 803
RCA/PROSCAN 802, 808
Toshiba 806, 807
* If an Aiwa VCR does not
work even though you enter
the code for Aiwa, enter the
code for Sony instead.