Kenmore 795.51819410 Use & Care Manual page 39

NOISE
i i iil!liiiii!,!,iJ iiiii!!i !ili ii lii! !l,,:,,,iil iili iiiiiiliiii iiii i iiii, !i!iii
Clicking The defrost control will click when Normal Operation
Dripping
Pulsating or High-
Pitched Sound
Rattling Normal Operation
Floor is weak or uneven or leveling legs need to be
adjusted. See the Door Alignment section.
Normal Operation
Whooshing Normal Operation
Normal Operation
Gurgling Normal Operation
Popping Normal Operation
Sizzling Normal Operation
Vibrating To eliminate the noise, make sure that the sides and
back cannot vibrate against any wall or cabinet.
Normal Operation
Normal Operation
the automatic defrost cycle begins
and ends. The thermostat control (or
refrigerator control on some models)
will also click when cycling on and
off:.
Rattling noises may come from the
flow of refrigerant, the water line on
the back of the unit, or items stored
on top of or around the refrigerator.
Refrigerator is not resting solidly on
the floor.
Refrigerator with linear compressor
was jarred while running.
Evaporator fan motor is circulating
air through the refrigerator and
freezer compartments.
Air is being forced over the condenser
by the condenser fan.
Refrigerant flowing through the
cooling system.
Contraction and expansion of the
inside walls due to changes in
temperature.
Water dripping on the defrost heater
during a defrost cycle.
If the side or back of the refrigerator
is touching a cabinet or wall, some of
the normal vibrations may make an
audible sound.
Water running into the drain pan
during the defrost cycle.
Your refrigerator is designed to run
more efficiently to keep your food
items at the desired temperature. The
high efficiency compressor may cause
your new refrigerator to run longer
than your old one, but it is still more
energy efficient than previous models.
While the refrigerator is running, it is
normal to hear a pulsating or high-
pitched sound.
39