Removing/Replacing Your Refrigerator And Freezer Handles And Doors - Kenmore 795.51819410 Use & Care Manual

NOTE: Removing the doors is the recommended procedure when it is necessary to move the refrigerator through a
narrow opening, if it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance may vary from the
illustrations on this page.
Removing Refrigerator Handle
Loosen the set screws with
a
3/32 in. (2.5
mm)
Alien wrench and remove the handle.
NOTE: If the handle mounting fasteners need
to be tightened or removed, use a 1/4 in. (6.4
mm) Allen wrench.
HOW TO REPLACE REFRIGERATOR
DOOR HANDLE
NOTE: Handle appearance may vary from the
illustrations on this page.
Mounting
fasteners
Set screw
/
)
Allen wrench
Replaclng Refrigerator Door Handle
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in (2.5 cm) Allen wrench.
NOTE: If the handle mounting fasteners
need to be tightened or removed, use a
1/4in. (6.4 mm) Allen wrench.
11