• To obtain Pitney Bowes supplies, please contact our Supply Line™ to place orders. Material Safety Data Sheets can be obtained on the web or from our Supply Line™.
SH39 Shredder | 3 Important Safety Notes WARNING! The machine may not be operated by more than one person at any given time. The machine was designed for safe operation by one person only. WARNING! During the shredding process no other work may be performed on the machine (for example cleaning, etc.).
4 | SH39 Shredder Purpose of Machine The SH39 shredder is a machine used for shredding general documents and data media such as CD’s, DVD’s, credit cards and 3.5” diskettes. CAUTION: This machine was designed to shred paper, credit cards and CD’s, DVD’s and 3.5”...
SH39 Shredder | 5 Parts of the Machine Item Part Description • When pressed (if the machine is off), the icon lights up and ON/Sleep/Stop button machine turns ON. • When pressed and held for about three seconds (if the machine is on), the machine tuns OFF.
6 | SH39 Shredder Control Panel Icons Item Icon Meaning Description Operation Lights when one of the following occurs: Error • Material jam in machine (too much material has been fed into the cutters) - the cutters jam, run in reverse for a short time, and stop. The motor turns off.
SH39 Shredder | 7 Operation 1. Press the ON/Sleep/Stop button to turn on the machine. • If the button lights up, the machine is ready to be fed material. Go to step 2. • If the icon lights up, it indicates that the operator interlock feature is enabled (see next page).
8 | SH39 Shredder Operator Interlock Feature The operator interlock feature, when enabled, prevents use of the machine. This can be useful in home office environments where there are young children present. When the machine is first shipped, the operator interlock feature is disabled.
SH39 Shredder | 9 Maintenance Cleaning the Material Sensor Photocells At some point, paper shreds or dust may accumulate on material sensor photocells that may impair their function. For example, after a paper jam, if paper particles should come to rest in the feed slot, the machine may not turn off because the sensors are detecting “paper”...
Page 10
10 | SH39 Shredder Troubleshooting Material Jam When too much material is being fed in either feed slot, the cutters jam, run in reverse for a short time (material is released), and stop. The motor turns off and the operation error icon lights up.