Correcting Distorted Stitch Patterns - ELNA eXcellence 680 Instruction Manual

w
+ –
+ –
+ –

Correcting Distorted Stitch Patterns

The sewing results of the stretch stitch patterns may vary
depending upon the sewing conditions, such as sewing
speed, type of the fabric, number of layers etc.
Always test sew on a scrap piece of the fabric that you
wish to use.
q
If decorative stitch patterns, letters, numbers or the
manual buttonhole stitch are deformed, correct them with
the feed balancing dial.
Remove the cap by using the screwdriver etc. Make sure
not to scratch the machine body with the screwdriver.
q Cap
w Neutral position
NOTE:
Return the feed balancing dial to its neutral position
when the sewing is finished.
Stretch stitch pattern
Example: Pattern 08 (mode 2)
If the pattern is compressed, turn the feed balancing dial
in the direction of "+".
If the pattern is drawn out, turn the feed balancing dial in
the direction of "–".
Letters and numbers
Example: Pattern 08 (mode 3)
If the pattern is compressed, turn the feed balancing dial
in the direction of "+".
If the pattern is drawn out, turn the feed balancing dial in
the direction of "–".
Stitch balance of the stretch buttonholes
Example: Patterns 29 (mode 1)
If the right row is denser, turn the dial in the direction of "+".
If the left row is denser, turn the dial in the direction of "–".
86