Kenmore 253.76085410 Use & Care Manual page 30

Air Conditioner Features Ccontlnued)
Note: The following instructions describe the Control Panel Touch Pads. The same instructions apply to the
Remote Control.
To turn unit on or off press the ON/OFF _) button:
The unit is programmed to start in the energy saver mode, with auto fan speed
and a temperature setting of 72 °F.
These settings are required by ENERGY STAR for maximum energy efficiency. We
recommend iust using the temperature buttons for controlling room comfort.
To change the Temperature Setting use the UP and Down arrows as required:
To use Cool, press the MODE button to select:
Note: In this mode, the fan remains on all the time with the compressor cycling on and
off when room temperature is reached.
To adjust Fan Speeds press the Fan Speed button and select:
LOW MED HIGH
To use the Auto Fan Feature press the Fan Speed button and select AUTO:
Note: Fan speed starts at high and adiusts to a slower speed as the room temperature
dictates. For example, if the room doesn't get too warm it will stay at the slowest speed.
If the room temperature rises quickly, such as when a door is opened, it will
automatically go to the highest speed. The fan speed will re-adiust back to the slowest
speed as the room returns to the original set temperature.
To operate on Fan Only, press the MODE button to select:
Use Fan Only function to circulate room air without air conditioner cooling. You can use
any fan speed you prefer and the actual room temperature will be displayed in the
DISPLAY.
6