Craftsman 172.43983 Operator's Manual page 8

KNOWYOUR CHAIN SAW
=
I NOTE: Before attempting to use this product, familiarize yourself with all
pperating features and safety rules.
i
Your Chain Saw has a precision built electric motor and it should only be connected to a
120-volt, 60 Hz AC ONLY power supply (normal household current). The electric Pole Saw/
Chain Saw should always be used with a GFCI (Ground Fault Circuit Interrupter) outlet.
DO NOT operate this Pole Saw/Chain Saw on direct current (DC). The large voltage drop
would cause a loss of power and the motor would overheat.
If the Chain Saw does not operate when plugged into correct 120-volt, 60 Hz AC ONLY outlet,
check the power supply. The Chain Saw comes with an electric plug and should be plugged
into a proper extension cord.
POLE SAW/CHAIN SAW FEATURES:
• Power: 1.5 HP, 9 Amp motor.
Bar length: 10"
Automatic lubrication system
Tool=less chain tension
Tool=less blade change
Oil tank with visible gauge
Oregon ® chain and bar
Front bumper
Weight 9.93 LBS
when filled with oil)
Pole (with extension)
TECHNICAL DATA:
• Voltage: 120V/60Hz
Rated power: 1.5 HP,9 Amp
Bar length: 10"
Oil tank capacity: 120ml
Chain Speed: 8.5 m/s
• Chain pitch: 3/8"
• Number of chain links: 40
Chain gauge: 0.05"
• Saw chain type: Oregon ®, 40pitches (91PX040X)
• Bar type: Oregon ®, 10" "(100SDEA041)
• SAW: Weight (chain & bar included): 9.7 Ibs
• Protection class: []/11
POLE SAW/CHAIN SAW CALL=
SAW List
1. Rear Handle 12.
2. On/Off Switch 13.
3. Lock-Off Button 14.
4. Oil Level Window 15.
5. Oil Filler Cap 16.
6. Front Handle 17.
7. Hand Guard 18.
8. Bumper Spike 19.
9. Guide Bar 20.
10. Chain 21.
11. Chain Tensioning Knob 22.
OUTS (See Figures 1 and 2 on page 15)
Chain Cover
Extension Cord Holder
Rear Hand Guard
Drive Sprocket
Chain Direction Symbol
Oil Outlet
Bar Clamp
Fastening Bar Bolt
Bar Locating Tabs
Bar And Chain Storage/Transportation Cover
Bar Tensioning Plate
POLE List
23. Extension pole handle
24. Locking collar
25. Receptacle cord
26. inner pole
27. Handle bracket
28. Knob
29. Clamping lever
KNOWYOUR CHAIN SAW cont.
CHAIN SAW CALL=OUTS cont. (Figures 1 and 2)
Fig 1.
®
®
I
I
Chain Rotation
1
®
Fig 2.
14 15