Crosley CRT151HQW0 Use & Care Manual page 6

some models
To level the cabinet using the front
rollers:
1
2
Remove the toe grille.
Use a flat-blade screwdriver or % inch
socket wrench to raise or lower the front
rollers (Figure 2).
Raise
F-
t
\!
Figure 2
or
Use adjustable wrench to adjust leveling
screws. Lower the leveling screws on each
side clockwise until they contact the floor
(Figure 3).
Raise the front of the refrigerator enough so
the doors close freely when opened halfway.
The refrigerator should slope 1/4inch to
1/2inch from front-to-back. Then level the
refrigerator from side-to-side.
4 Some models are equipped with an anti-
tip bracket (Figure 4). Lower it clockwise
until it contacts the floor.
Figure 4 (some models)
A The antFtip device must be
Jj,_, installed according to the
J/%_ instructions in your Use &
Z_ Care Manual. Failure to do
SO w! resut !n !njury.
When reversing the door swing:
You MUST move the anti-tip bracket to align
with the hinges of the door. Failure to do so
will result in injury.
Raise
Figure 3