Maytag 7MMHW7100DC0 Use & Care Manual page 11

f
8, Select CYCLE*
normal
m m
P_w_rWash
overnigh"_
wash & dry
allerge_
sanitize
cold
wash
m
wrinkle
contro!
_e}icates
_edding
Appearance may vary.
Turn cycle knob to select your wash cycle. See "Cycle Guide" for
details on cycle features.
9, Adjust settings, if desired*
extra
( lco[d warm hot
temperature
extra
) light reed heavy
SOil
{eve_ m m m
max
I sp,n speed )none reed extract
Appearance may vary.
1 0, Select any additional options*
fresh
m hold
steam
m for stains
am extra
rinse
m cycle
signal
control
m lock
hold 3 sees
Appearance may vary.
To add an option to the cycle, touch its name - Fresh Hold/Fresh
Spin, Steam for Stains, Extra Rinse, Cycle Signal, or Control Lock.
To remove an option from the selected cycle, touch the option
again.
1 1, Setting a delayed start
estimated cycle time
The display will show the default settings for the selected cycle.
To adjust a setting, touch its name - Temperature, Soil Level, or
Spin Speed. Adjusting settings will change the Estimated Cycle
Time. Tightly packing the load, unbalanced loads, or excessive
suds may also cause the washer to increase the cycle time.
If you do not want to begin a cycle immediately, you may choose
the DELAY START option. This will delay the start of the wash
cycle by 9 to 12 hours.
To set a delayed start:
1. Touch DELAY START + and - buttons to set the desired delay
time.
2. Touch and hold START to set the delay. The delay countdown
has started when the START light stops blinking.
*Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
11