LG WM3250HRA Owner's Manual page 27

USNG YOUR WASHING MACHINE 27
Saving energy, ColdW_sh _M
Adding the ColdWash
TM
option reduces energy usage and
provides the same washing performance as a warm water
wash
By using 6 different washing motion (Tumbling, Rolling,
Stepping, Scrubbing, Swing, Filtration), fabrics get the cleaning
benefits, without the energy usage
1 Press _(9_),_x and turn _)_ to the desired cycle.
2 Press _. The washer will automatically adjust the cycle
settings
3 Set any other desired options.
/ x
4 Press NI.
,_x
,,-@NOTE
', • When you select the ColdWash
TM
option, wash time will
', be increased up to 10 minutes.
', • For high wash efficiency, it Js recommended to use less
than 8 pounds
Turn on!off melody and button tones,
The washing machine plays a melody when the wash cycle
is finished. The buttons make a sound each time a button is
pressed. The melody and button tones can be turned on and
off as desired.
Press and hold _for 3 seconds during the wash cycle
- Once signal OFF is set, the signal beeps once
(When the-end-of-cycle signal is disabled)
Press and hold _for 3 seconds during the wash cycle
- Once signal ON is set, the beeper beeps once.
(When the CHILD LOCK is activated.)
Press and hold _ for 3 seconds during the wash cycle.
@ NOTE ......
* Child Lock lasts after the end of cycle If you want to
deactivate this function, Press and hold the Pre-Wash
I button for 3 seconds. /
Detecting weight of load, LOAD SIZE
Loading the washing machine and pressing the start button
triggers the machine to detect the weight of the load, and
the load size icon _ on the display panel for 10
displays
seconds. If the load size icon L_ isnot on, you can check
the weight of the load again d_ing the cycle This feature
willhelp you set the detergent amount so as to wash clothes
efficiently b ased on the detected load size.
@ NOTE
If the washer has detected a small load size, the display
may only show one lighted bar. Only a small amount
of detergent should be used, because the amount of
clothing and the quantity of water that will be used is
small.
L-W
LOAO
SEE
The load detection routine only works with dry clothes.
Since the detection system is detecting the WEIGHT of
the load, it will be affected by unusually heavy articles
in the load. For example, a garment that is already wet
that is loaded with other items will cause the LOAD SiZE
reading to be inaccurate.
\ .................................................................................................................................................
Setting options during cycle
You can add the desired options during the wash cycle
Button lock feature, Child Lock
You can lock the washing machine to prevent children or
others from changing the cycle settings by pressing the
buttons during the cycle.
Press and hold _ for 3 seconds during the wash cycle
When the CHILD LOCK is enabled, m message and the
- aL_ -
remaining wash time are displayed, in turn, on the display
panel of the washing machine.