GE CDT765SSF1SS Installation Instructions Manual page 11

Dishwasher Installation
STEP 18: CONNECT DRAIN LINE (Cont.)
. Connect drain line to air gap, waste tee or disposer
using the previously determined method. Secure hose
with a screw-type clamp.
Method 1 - Air gap with waste tee or disposer
Waste Tee Installation
Disposer Installation
Figure AB
Method 2 - "High drain loop" with waste tee or disposer
With this method you will need the drain hose hanger set aside
in Step !.
Fasten drain hose to underside of countertop with the provided
hanger.
__ Drain Hos, e Hanger
WasteTeeInstallation
Figure AC
DisposerInstallation
IMPORTANT
- When connecting drain line to
disposer, check to be sure that drain plug has been removed.
DISHWASHER WILL NOT DRAIN IF PLUGIS LEFTIN PLACE.
4 Remove
Drain
Plug
Tip: Avoid unnecessary service call charges for a no drain
complaint.
Make sure excess drain hose has been pulled through
the cabinet opening. This will prevent excess hose in the
dishwasher cavity from becoming kinked or crushed by the
dishwasher.
STEP 19: CONNECT POWER SUPPLY
Ifa power cord with plug is already installed proceed to
Step 20.
AWARNING:
If housewiring isnot 2-wire with ground,a ground must be
providedby the installer.When housewiring is aluminum,be sure
to useUL-Listedanti-oxidant compound and aluminum-to-copper
connectors.
In this step you will need the junction box cover and the
#10 Hex head screw from the screws set aside in Step 1.
. Secure house wiring to the back of the junction box with a
strain relief.
. Locate the 3 dishwasher wires, (white, block and green) with
the stripped ends coming out of the ACjumper. Use UL listed
wire nuts of appropriate size to connect incoming ground to
green, white to white and black to black.
. Install the junction box cover using #10 hex head screw.
Check to be sure that wires are not pinched under the cover.
. Hake sure that the junction box cover is resting on the
mounting bracket.
. If using a Power Cord Kit, please refer to the included
instructions.
NOTE:Do not remove the
Junction Box Bracket.
Ground
White
AC
Figure AD
Black
@our Screws
Junction Box
Bracket
11