Table of Contents
Advertisement
CAUTION:
Always be sure that the tool is triggered off before inspection or
maintenance.
1.
Inspecting screws of the tool
To make sure all of threads are fasten with correct way and tight
after disassembly or maintained the tool.
2.
Maintenance of tool
Please clean up the tool regularly with dry wiper. Do not use oil,
gasoline, thinner, water, or other corrosiveness liquid, it may
damage the tool.
** Disconnect the plug from the power source and turn off the switch
before clean the tool.
3.
Storage
Keep power tools out of the reach of children and humidity area.
4.
Repair
Please contact with the authorized service center if problems cannot
be solved.
CAUTION:
Always use authorized replacement parts and accessories. Never
use replacement parts or accessories which are not intended for use
with this tool. The use of any other attachment or accessory can be
dangerous and could cause injury or mechanical damage.
Cordless screwdriver
Micro USB/USB cord
Bits
MAINTENANCE
ACCESSORIES
9
Advertisement
Table of Contents
