Table of Contents
Advertisement
2. Use personal protective equipment. Always wear eye protection.
Always use protective equipment such as duct mask, non-skid
safety shoes, hard hat, or heating protection for appropriate
conditions will reduce personal injuries.
3. Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or battery
pack. picking up or carrying the tool. Carrying power tools with
your finger on the switch or energizing power tools that have the
switch on invites accidents.
4. Remove any adjusting key or wrench before turning on the power
tool. A wrench or key left attached part of the power tool may
result in personal injury.
5. Do not overreach. Keep proper footing and balance at all the
times. It will enable you got better control once power tool in
unexpected situations.
6. Dress properly. Do not wear loose clothing. Keep your hair,
clothing and gloves away from wroking parts. Loose clothes or
long hairs can be caught in working parts.
7. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly
used. Use of these devices can reduce dust-related hazards.
Power tool use and care
1. Do not force the power tool. Use correctly the power tool for your
application. To use correctly the power tool will get the better
performance and more safety.
2. Do not use the power tool if the switch doesn't work. Any power
tool cannot be controlled if switch is fault. If it is happened, please
contact the authorized service center.
3. Please disconnect the power source before adjusting, changing
accessories or storing power tools. It will prevent the risk of
starting the power tools accidentally.
4. Keep the power tools away from children and do not allow
persons who unfamiliar or without this instructions to operate the
power tool. Power tools are dangerous to untrained users.
5. Maintain power tools. Check for misalignment of binding of
3
Advertisement
Table of Contents
