Priming Machine Before First Use - CBTL Contata S03 User Manual

1

Priming machine before first use

1
Warning! Use only filtered/
bottled water in this
machine! Do not put any other liquid
or food in the water tank, except as
instructed in the descaling section of
this instruction book.
Fill the water tank with filtered/bottled water.
3
The beverage buttons and alarm indicator light will blink
simultaneously.
5
Press the long espresso button once. Wait approximately 2 minutes
for the machine to complete the priming cycle. During this cycle, the
alarm indicater light will blink. The alarm light will go off and the 3
beverage buttons will blink to confirm the end of the priming cycle.
Repeat this step only if the alarm indicator light continues to blink.
11CBV_BB_ManualS03_USA.indd 7
2
Plug into grounded outlet then turn power switch on.
4
Place an ample container under the dispensing spout.
6
If required, empty water from the used capsule drawer. Your machine
is now ready for use.
7
12/21/10 1:42 PM