1- Before The First Use: Prime The Pump - CBTL 10134 Instruction Book

1
Before First Use: Prime the Pump
1
Unpack the beverage system and
remove all packaging materials.
3
Place a cup or mug onto the drip tray.
5
Press the ON/OFF button to the ON position. All 6 beverage
buttons and the red indicator light will begin to flash.
IMPORTANT: Make sure the capsule lever is
lowered to its original position.
2
Fill the water tank. There are 3 ways:
• remove the water tank cover
• flip the water tank lid open to use a spouted container
• pull the water tank up and out of the unit using the side
grips to remove.
Fill water tank with cool, clean water (it is STRONGLY
recommended you use DISTILLED WATER) to the MAX water
fill line. Make sure water tank is closed and locked properly
into position before proceeding.
4
Plug the power-supply cord into a
grounded 3-prong electrical outlet.
Prime the Pump. Press any beverage
6
button. After a moment, the pump will
operate. The priming process will take
about 2 minutes.
7