Acumen Ai-T40 User Manual page 41

Step 2: In the preset setting tab, enable preset, set the preset name and then click preset
"Setting" button.
Step 3: Control the dome by rotating up, up left, down, right down, left, left down, right and
up right and adjust the rotate speed and the value of zoom, focus and iris of the dome.
Step 4: Select the serial number of the preset point. Click
wiper and click
Note: PTZ must support wiper and light button and these two buttons are just available
when selecting PELCOP or PELCOD.
Step 5: Click Save button to save the setting. Click
to view this bar again. Click
Step 6: Return to the
To set up cruise:
Step 1: In the Advanced interface, click cruise "Setting" button to see a window as shown in
DVR User Manual
Fig 4-34 Advanced-Preset Setting
Fig 4-35 Preset Setting
button to enable the PTZ light.
icon to exit the current interface.
Advanced-Preset Setting
icon to hide the tool bar. Right click
interface and click OK button to save the setting.
36
button to enable the PTZ