Acumen Ai-T40 User Manual page 29

DVR User Manual
Fig 4-17 Alarm Configuration-Sensor-Alarm Handling
Step 6: Enter into alarm tab to select the options to handle alarm.
Fig 4-18 Alarm Handling-Trigger
Buzzer: If selected, the local buzzer would be activated on an alarm.
Show Full Screen: If selected, there will pop up the chosen channel on the monitor on an
alarm trigger.
To Alarm out: If selected, this would trigger the external relay output on detecting a sensor
based alarm.
Email: If selected, the DVR will send an email alert to the preconfigured email address in
case of a sensor based alarm from the particular input.
Snap: If selected, the system will snap images of the checked channels on an alarm and save
them in the HDD automatically.
Step 7: Enter into To Record tab. Select recording channels. It would be recorded in case of an
alarm. Click OK button to save the setting.
Step 8: Enter into To PTZ tab. Set preset, cruise and track options for a PTZ in case of a
sensor based alarm. Single or multiple PTZ units could be programmed to perform this
function on the same alarm.
Step 9: Enter into Schedule tab. The setting steps for schedule for sensor based alarm are
similar to normal schedule setup. You can refer to 4.4.1 Schedule for details. This step is very
24