Basic Configuration; System - Acumen Ai-T40 User Manual

4.1 Basic Configuration

Basic configuration includes three sub menus: system, date & time and DST.

4.1.1 System

Step 1: Enter into MenuSetupBasic System interface. Refer to Fig 4-3:
Step 2: In this interface you can setup the device name, device ID, video format, max network
users, VGA resolution, language and so on. The definitions for every parameters display as
below:
Device Name: The name of the device. It may display on the client end or CMS that help user
to recognize the device remotely.
Device ID: This ID is used to map the DVR with IR remote controller and speed dome
cameras.
Video Format: Two modes: PAL and NTSC. User can select the video format according to
that of camera.
960H Mode: This function is only applicable for 8/16 CH DVR.
Password Check: If this option is enabled, the user would need to input the user name and the
password for performing corresponding operations.
DVR User Manual
Fig 4-2 Setup
Fig 4-3 Basic Configuration-System
13