1. Manuals
  2. Brands
  3. Acumen Manuals
  4. DVR
  5. Ai-D3 series
  6. User manual

Acumen Ai-D3 series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DVR User Manual
(Ai-D3, AiP-D5, AiP-D7 series)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ai-D3 series and is the answer not in the manual?

Questions and answers

Related Manuals for Acumen Ai-D3 series

Summary of Contents for Acumen Ai-D3 series

  • Page 1 DVR User Manual (Ai-D3, AiP-D5, AiP-D7 series)
  • Page 2 User's installation and operation Manual Important Safeguards and Warding Do not place heavy objects on the DVR. Do not let any solid or liquid fall into or infiltrate the DVR Please brush printed circuit boards, connectors, fans, machine box and so on regularly. Before the dust cleaning please switch off the power and unplug it.

  • Page 3: Table Of Contents

    Directory 1 Production Introduction ............................5 1.1 Product overview ............................5 1.2 Main functions .............................. 5 2 Open-package check and cable connections ....................6 2.1 Open-package check ............................. 6 2.2 Hard disk installation ............................ 7 2.3 Shelf installation ............................8 2.4 Front panel ..............................
  • Page 4 4.3.3 Video Loss ............................. 41 4.3.4 Alarm input ............................. 41 4.3.5 Alarm output ..........................42 4.3.6 Abnormal ............................42 4.3.7 Intelligent analysis ........................43 4.4 System setup ............................... 46 4.4.1 General ............................47 4.4.2 Encode setup ..........................49 4.4.3 Network setup ..........................51 4.4.4 NetService .............................

  • Page 5: Production Introduction

    1 Production Introduction 1.1 Product overview The series DVR is designed specially for security and defence field which is an outstanding digital surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces standard H.264mp video compressed format and G.711A audio compressed format which insures the high quality image, low error coding ratio and single frame playing.

  • Page 6: Open-Package Check And Cable Connections

    Playback ·individual real-time video recording as well as searching, playback, network surveillance, recording check, downloading and so on ·multi-playback mode ·zoom at arbitrary region Net operating ·through net tele-surveillance in the real time ·tele-PTZ control ·tele-recording check and real-time playback Alarm linkage ·Alarm activated video record, tour ,message, buzzer, e-mail, ftp Communication interface...

  • Page 7: Hard Disk Installation

    connection between the fan power and the main board. 1. Front panel and rear panel  The key function specification in the front panel and the interface specification in the real panel are in the specification.  Please check the product type in the front panel whether is accordant with the product type you order.

  • Page 8: Shelf Installation

    ⑦ cover the machine ⑧ fix the cover 2.3 Shelf installation This product chassis specification for the standard 1u,so it can be installed in the standard shelf. Installation steps and attention items: 1、Make sure the temperature in the room lower than 35℃ (95°f). 2、Keep the equipment have 15cm(6 inches)space around in order to air's circulation.

  • Page 9: Rear Panel

    2.5 Rear panel The Backplan of DR series Video Input 2. Video/Audio Output 3. VGA Output 4. Audio Input 5. Network 6. HDMI 7. USB 8. RS485 9. Power 12V 10. P/W Switch Ground screw 2.6 Audio and video input and output connections 2.6.1 Video input connections The video input port is BNC connector plug.

  • Page 10: Video Output Connections And Options

    The ground and power supply of the vidicon and the DVR should be shared and stable. Insure the transmission line stable and credible The video transmission line should adopt high quality coaxial pair which is chosen by the transmission distance. If the transmission distance is too far, it should adopt shielded twisted pair, video compensation equipment and transmit by fiber to insure the signal quality.

  • Page 11: Audio Signal Output

    2.6.4 Audio signal output Commonly the output parameter of DVR audio signal is greater than 200mv 1KΩ(BNC) which can connect the low impedance earphone and active sound box or other audio output equipments through power amplifier. If the sound box and the tone arm can not be isolated, howling phenomena is often existed.

  • Page 12: Alarm Input Port Specification

    E. The voltage between the AB lines of the decoder must be less than 5V. 4. Front equipment grounding note Bad grounding can lead to the burnout of the chip. 5. Alarm input type unlimited The DVR alarm output port is constant opening type. Eight external alarm interface (1) alarm input 1,2,3,4 (2) ground...

  • Page 13: Alarm Output Port Relay Parameters

    Please refer to the relay relevant parameters to avoid the overload that damages main machine. 2.7.3 Alarm output port relay parameters Type：JRC-27F Interface material silver rating Rating switch capacity 30VDC 2A, 125VAC 1A maximal switch power 125VA 160W (resistance load) maximal switch voltage 250VAC, 220VDC maximal switch current...

  • Page 14: Turn Off

    3.2 Turn off There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn off the system] option is called soft switch. Pressing the power supply switch is called hard switch. Illumination: 1、Auto resume after power failure If the DVR is shut down abnormally, it can automatically backup video and resume previous working status after power failure.

  • Page 15: Preview

    Picture 3.1 System Login Password protection: If the password is continuous wrong three times, the alarm will start. If the password is continuous wrong five times, the account will be locked. (Through reboot or after half an hour, the account will be unlocked automatically). For your system security, please modify your password after first login.

  • Page 16: Main Menu

    Shortcut menu in full analog (DVR)/ Hybrid (HVR) mode *compare to analog/hybrid mode's shortcut menu, the full digital mode do not have color setting function. 3.5.1 Main menu When you login, the system main menu is shown as below. Picture3.3 Main Menu...

  • Page 17: Playback

    3.5.2 Playback There are two methods for you to play the video files in the hard disk. 1、 In the desktop shortcut menu. 2、 Main menu>Record->Playback Note: The hard disk that saves the video files must be set as read-write or read-only state. (4.5.1).

  • Page 18: Record Control

    Picture 3.5 Playback control key Note: play under frame by frame, the playback status should be paused firstly. 【Operation tips】show function of the key that cursor placed. Special functions： Accurate playback：Input time (h/m/s) in the time column and then click play button.

  • Page 19: Alarm Output

    3.5.4 Alarm output Please check current channel status: “○” means it is not in alarming status, “●” means it is in alarming status. You can use desktop shortcut menu or click [main menu]> [alarm function]> [alarm output] to enter the alarm output interface. Picture 3.9 alarm output 【Configuration】Alarm is on according to the configuration.
  • Page 20 Picture 3.10 PTZ setup 【Speed】Set the PTZ rotation range. Default range: 1 ~ 8. 【Zoom】Click button to adjust the zoom multiple of the camera. 【Focus】Click button to adjust the focus of the camera . 【Iris】Click button to adjust the iris of the camera. 【Hide】Current interface will be temporarily hidden after click it.
  • Page 21 Step 2: click the Preset button, then write the preset points in the input blank, Step 3: click Settings button, return the Picture 3.10 Complete setup, that is the preset points and preset position corresponds. Clear Preset：Input preset points, click Remove button, remove the preset. Preset point input blank Preset button Picture 3.11 Preset Settings...
  • Page 22 Cruise lines are connected by multiple preset points, setting procedure is as follows: Step1: In Picture 3.10, the Direction key will turn PTZ to designated location, click Settings button to enter Picture 3.13, Step 2: click Cruise buttons, the write proper value into the Cruise Line and Preset Points blank，then click Add Preset Points button, complete setting (also can add and delete cruise line which has been set up) Step 3: repeat step1 and step2 , until set out all the preset designated cruise lines。...
  • Page 23 Focus, Aperture, Direction and so on. Click Setup button to go back Picture 3.14 Step4: Click End button to complete setup。Click the right button of the mouse to exit. Scan value blank Scan Button Picture 3.14 Scan Setup 2）Scan Calls In Picture 3.10, click Page Shift button, then enter PTZ control menu as shown in Picture 3.12.
  • Page 24 Left/Right scan setting button Line scan button border Picture 3.15 Boundary Scan Setup 2）Boundary Scan Calls In Picture 3.10, click Page Shift button, then enter PTZ control menu as shown in Picture 3.12. Please input the number of scan in the value blank , then click Scan button，PTZ begins to work on the scan line .

  • Page 25: Color Setting

    Picture 3.16 Auxiliary Function Control 【Intuitive Auxiliary Operation】 choose auxiliary equipment, select Open or Close button, switch control； 【Auxiliary Number】The operation of corresponding auxiliary switch according to PTZ agreement； 【Page Shift】In Picture 3.16，click Page Shift button enter the Picture 3.17 PTZ Main Menu, the menu itself can be control by the menu control buttons 3.5.6 Color setting Set the selective image parameters (current channel for single window display and cursor...

  • Page 26: Output Adjust

    Picture 3.18 Color Setting 3.5.7 Output Adjust Hybrid mode is with black margin vertical & horizontal, while full digital mode without. Adjust TV output area parameters. You can use the desktop shortcut menu or enter [main menu]> [management tools]> [Output adjust]. Hybrid (HVR) Mode...

  • Page 27: Logout

    Picture 3.19 Output Adjust Note: The black margin vertical & horizontal at output adjust of hybrid mode is only effect to analog channel. 3.5.8 Logout Logout, shut down the system or reboot up. You can use the desktop shortcut menu or enter [main menu].

  • Page 28: Main Menu

    4 Main menu 4.1 Main menu navigation Main menu Sub menu Function Config Set the recording configuration, recording type, recording time section playback Set recording search, recording play, video file storage Record Storage Set screen capture period, type etc. backup Detect backup device, format device, back the selective files Set motion detect alarm channel, sensitivity, area, linkage parameters: Motion...
  • Page 29 General Set system time, data format, language, hard disk full time operation, configuration machine number, video format, output mode, summertime, stay time Set main (extra) coding parameter: code mode, resolving ability, frame rate, code stream control, image quality type, code stream value, frame Encode between value, video/audio enable, configuration...

  • Page 30: Record

    Break the connection with the already login user. Lock the account after Online user break until booting up again. Adjust upside, downside, nearside, starboard distance, black margin Output adjust vertical & horizontal Note：only analog channel have black margin vertical & horizontal Automatic Set automatic reboot system and automatic deleting files.
  • Page 31 consecutive recording in the first startup. You can enter [main menu]> [recording function]> [recording setup] to set. Note: There is at least one read-write hard disk.（refer to chapter 4.5.1） Picture 4.1 Record Configuration 【Channel】 Choose the corresponding channel number to set the channel. Choose the all option to set the entire channels.

  • Page 32: Playback

    time section. Manual: Click the button and the according channel is recording no matter the channel in any state. 【Period】Set the time section of common recording, The recording will start only in the set range. 【Record type】Set recording type: regular, detection or alarm. Regular: Perform the regular recording in the set time section.
  • Page 33 Picture 4.2 Backup 【Detect】Detect the storage connected with the DVR such as hard disk or universal disk. 【Backup】Click backup button and the dialog box is popped up. You can choose the backup file according to the type, channel and time.
  • Page 34 Picture 4.3 Backup Remove：Clear the file information. Add：Show the file information satisfying the set file attributes. Backup format：configurate the backup file format, according to require, can choose Start/pause：Click the play button to start the backup and click the pause button to stop the backup.

  • Page 35: Snapshot Storage

    4.2.4 Snapshot Storage Setup snapshot parameters for different channels. At first time it's set for 24hours snapshot continuously, please go to Main Menu--Record--Snapshot Storage for appropriate setting. Note:If normal snapshot storage, please setup snap at Main end--advanced--snapshot(please refer to chapter 4.5.1 HDD Manager) Picture 4.2 snapshot storage 【Channel】Select the related channel to set, click"all"to set all channels.

  • Page 36: Alarm Function

    preset for snapshot enable. Alarm：snapshot at set period when alarm in which is preset for snapshot enable. Note: for related alarm function, please refer to chapter 4.3. 4.3 Alarm Function Alarm functions include: motion detect, video blind, video loss, alarm input and alarm output, abnormality、intelligent analysis.
  • Page 37 Pic 4.4 【Channel】Choose the set motion detect channel. 【Enable】■ means that the motion detect function is on. 【Sensitivity】Choose in the six options according to the sensitivity. Note: Only the motion detect under hybrid mode/ full analog mode have this function of setting sensitivity, and also only the analog channel can set region.
  • Page 38 Picture 4.6 set the time section 【Interval】 Only one alarm signal is turned on even there are several motion detect signals in the set interval. 【Alarm output】Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on. 【Delay】...
  • Page 39 Hybrid mode, PTZ link to the related PTZ information of analog channel, While digital channel model, the PTZ is link to the related PTZ information on the remote device connected. Note：to link PTZ, need go [Shortcut menu]->[PTZ control] to set preset point, cruise between points &...

  • Page 40: Video Blind

    4.3.2 Video Blind When the video image is influenced by the environment such as bad brightness or reaching the set sensitivity parameter, the camera mask function is turned on and the linkage function is turned on. Same as motion detect function, video blind is different between Hybrid mode & Full digital mode: Digital channel: not only to enable video blind function at local side, but also to enable the remote device that was connected.

  • Page 41: Video Loss

    4.3.3 Video Loss When the equipment can not obtain the channel video signal, the video loss alarm is turned on and the linkage function is turned on. Same as motion detect function, video loss is different between Hybrid mode & Full digital mode: Digital channel: not only to enable video loss function at local side, but also to enable the remote device that was connected.

  • Page 42: Alarm Output

    Alarm input is the same between hybrid mode & full digital mode, function enable, when it was set normal, only need to connect alarm sensor at alarm input port on local side, the alarm information is occurring, and will link to related setting functions at the same time Note: "Advanced"...

  • Page 43: Intelligent Analysis

    Picture 4.11 Abnormal 【Event Type】selecting abnormity you want to inspect 【Enable】Select it to make sure abnormal function workable 【Show message】Automatically alarm cue dialog box come out of the main screen 【Buzzer】Device will have one long nosie “di” while alarm is happening 4.3.7 Intelligent analysis Note: only part of product support this function at present。...
  • Page 44 and if this function is enabled, then video blind is invalid. Pic 4.12 Intelligent analysis setting page 【Channel No.】 only shows by “1”，at present, only the 1 channel with maximum resolution of 1080P in the full analog(DVR) mode and hybrid(HVR) mode 【Enable】tick it to enable the video analysis function, then can go for further setting, 【Algorithm rule】at drop-down box to choose the algorithm rule of detection,...
  • Page 45  Alert way: there are 2 kinds： cordon and warning area. Cordon： Can set 3 prohibited directions: bidirectional prohibited, from top to bottom (from left to right), from bottom to top (from right to left), when the setting cordon is too slope, show with from left to right / from right to left, otherwise will be from top to bottom / from bottom to top, when the moving object meet preset cordon rules, the alarm will be triggered;...

  • Page 46: System Setup

    around the moving object  Sensitivity , base on different requirement, there are 3 options in the drop-down box  Minimum image distance range between 0~30 %，the more flexible the less image distance.  Alert way: three modes: Items stranded、Items stolen、Illegal parking. Items stranded:object appears within warning area, and the size of object meet the rules of minimum image distance, alarm will be triggered.

  • Page 47: General

    4.4.1 General Picture 4.17 General setup 【System time】Set the system data and time. 【Date format】Choose the data format: YMD, MDY, DMY. 【Date Separator】Choose list separator of the data format. 【Time Format】Choose time format: 24-hour or 12-hour. 【Language】support 29 language at present:Arabic,Czech,English,Finnish,Greek,Indonesian,Italian,,Japanese,Portuguese,Russia n,Thai,T-Chinese,S-Chinese,Turkish,Brazilian,Bulgarian,Farsi,French,German,Hebrew,Hungar ian,Polish,Romanian,Spanish,Swedish,Vietnamese...
  • Page 48 number is matched, the remote operation is valid. 【Video Standard】PAL or NTSC. 【Auto Logout】Set the latency time in 0-60. 0 means no latency time. 【Machine Name】Can setting the device's name. 【DST】Choose the summer time option and pop the dialog box as followed. Picture 4.18 DST (week)

  • Page 49: Encode Setup

    Picture 4.19 DST (date) 4.4.2 Encode setup Set the video/audio code parameter: video file, remote monitoring and so on. Set every main stream parameter in the left part, and set the extra stream parameter in the right part. Note: extra stream introduces video compression technique which was applying for multi-channel playback simultaneously, Dial-up multi-channel real-time monitor under poor bandwidth, or mobile monitor and so on.
  • Page 50 Picture 4.20 Encode setup Independent channel code setting 【Channel】Choose the channel number. 【Compression】Standard H.264 main profile. 【Resolution】Resolution type:1080P/720P/960H/D1/ HD1/CIF / QCIF. 【Frame Rate】P:1 frame/s~25 frame/s; N: 1 frame/s~30 frame/s 【Bit Rate Type】You can choose limited code stream or variable code stream. When you choose the variable code stream there are six image quality options.under the limited code stream，you can choose the code stream manually；...

  • Page 51: Network Setup

    multiplex stream. Extra stream Settings 【Extra stream】is used for client side monitoring & mobile monitoring. 【Channel title】select channel title and then to choose whether need enable video & audio. The resolution, frame rate, bit rate type settings is the same as main stream. 4.4.3 Network setup Picture4.21 Network 【Net Card】You can choose cable network card or wireless network card.

  • Page 52: Netservice

    The IP address is offered by network provider. The address must be set and reboot then it works. 【Media port】Default: 34567. 【HTTP port】Default: 80. 【HS Download】 【Transfer Policy】There are three strategies: self-adaption, image quality precedence and fluency precedence. The code stream will adjust according to the setup. Self-adaption is the tradeoff between the image quality precedence and fluency precedence.
  • Page 53 【PPPoE setup】 Picture4.23 PPPOE Enable: Reverse■ means choose, setting can become effective. Input the user name and password that ISP（Internet service provider）provides. After saving it reboot up your system. Then the DVR will build a network connection based on PPPoE. The IP address will change into dynamic IP address after above operation is well done.
  • Page 54 icture 4.24 NTP The NTP server must be installed in the PC. Enable: Reverse ■ mean choose，setting can become effective. Host computer IP: Input the IP address installed NTP server. Port: Default: 123. You can set the port according to NTP server. Time zone: London GMT+0 Berlin GMT +1 Cairo GMT +2 Moscow GMT +3 New Delhi GMT +5 Bangkok GMT +7 Hongkong Beijing GMT +8 Tokyo GMT +9 Sydney GMT +10 Hawaii GMT-10 Alaska GMT-9 Pacific time GMT-8 American mountain time...
  • Page 55 Picture 4.25 EMAIL SMTP server: Email server address. It could be an IP address or domain name. Domain name can be translated only it is the correct DNS configuration. Port: Email server port number. SSL: Decide whether using Secure Socket Layer protocol to login. User Name: Apply the email server user name.
  • Page 56 addressed are supportive in the list.You can delete the set IP address by √ in the options. Note：When the same IP address is in the white and black list at the same time, the black list precedence is higher. Picture 4.26 IP FILTER 【DDNS】...
  • Page 57 Picture 4.27 DDNS setup It is the abbreviation of dynamic domain name server. Local domain name：Provide the domain name registered by DDNS. User name：Provide the account registered by DDNS. Password：Provide the password registered by DDNS. When the DDNS is successfully configured and start, you can connect the domain name in the IE address column to visit.
  • Page 58 Picture 4.28 FTP setup 【Enable】Click Enable, then all settings will be available 【Server IP】IP address for FTP server 【Port】Domain Port of FTP, default 21 【User Name】User name of FTP 【Password】Password of user 【Anonymous】 ：enable anonymous, no need setting user name and password 【Max File Length】Max length for upload files at every packed, default 128M 【Dir Name】...
  • Page 59 Picture 4.29 ARSP [Type]: choose "DNS" [Enable]: ■ means it is chosen [Sever IP]: IP address of DDNS server [Port]: Port No. of device, related DDNS server listen port [User name] the user name that device can log in DDNS server [Password] the password related to the user name.
  • Page 60 Pic: 4.30 alarm server setting 【Protocol type】GENERAL 【Enable】To tick it means enable. 【Server IP】IP address of Alarm Server 【Port】Device Port No. 【Alarm Report】Tick it means to report alarm information to server. 【Log Report】Tick it, means to report log to server. 【Wireless Coning】...
  • Page 61 Picture 4.31 Wireless Config 【Enable】Choose Enable to make all settings available 【Type】Dial type, default AUTO 【Wireless AP】3G access point 【Dial Number】3G Dial Number 【User Name】User name of 3G 【Password】Password of dial user 【IP Address】IP address, got from dial 【Mobile Monitor Setup】 To visit the device by mobile, please make a router mapping of this port and use CMS to monitor and operate it by protocol.
  • Page 62 Picture 4.32 Mobile Monitor Setup 【Enable】 Select it to make sure abnormal function workable 【Port】It’s a port of mobile monitoring which you need to make a router mapping of if want to visit it by mobile 【UPNP】 UPNP protocol is to realize auto port forwarding on router, precondition of using this function is to make sure the UPNP function of router is enabled.
  • Page 63 Picture 4.33 UPNP 【Enable】Choose Enable to make sure all UPNP settings available 【HTTP】Route will automatically distribute HTTP port for the device, when IE viewing, it need this port 【TCP】Router will automatically distribute TCP port for the device, when monitoring via CMS, it need this port.
  • Page 64 Pic 4.34 WIFI configure 【Search】 ：click【search】to search all the available wireless device in current range. 【enable】 ：tick it to enable firstly, then go for further setting. 【auto obtain IP address】 ：tick it to enable, device will auto obtain a WIFI IP. 【SSID】...

  • Page 65: Gui Display

    Pic 4.35 RTSP setting 【Enable】 ：■ means enable, tick it firstly before setting. 【Port】 ：the default port is 554 4.4.5 GUI Display Configure the video output parameters including the front output mode and encode output mode. Front output：In the local preview mode include: channel title, time display, channel display, record status, alarm status, transparency and region cover.
  • Page 66 The GUI display page under hybrid(HVR) mode and all analog(DVR) mode Pic 4.36 output mode 【Channel Title】Click the channel name modify button and enter the channel name menu. Modify the channel name. The 16 Chinese characters and 25 letters are supportive.

  • Page 67: Ptz Device /Rs485 Device

    【Channel】Choose the set code output channel number. 【Region Cover】means the selective state. Click the cover area button and enter the corresponding channel window. You can cover the arbitrary using mouse. (Black region is for output) 【Time display】 and 【Channel display】 set the display position of channel title and time title.
  • Page 68 consistent with the dome address.） 【Baudrate】Choose the corresponding dome baud rate length. You can control the PTZ and vidicion. Default: 115200. 【Data bits】Include 5-8 options. Default: 8. 【Stop bits】Include 2 options. Default: 1. 【Parity】Include odd check, even check, sign check, blank check. Default: void. When under full digital mode, it will show RS485 device.

  • Page 69: Rs232

    is all digital(NVR) mode, it will show RS485 only. 4.4.7 RS232 Pic 4.39 serial port setting 【Serial Port Function】Common serial port is used to debug and update program or set up specific serial port. 【Baud rate】Choose the corresponding baud rate length. 【Data bits】Include 5-8 options.

  • Page 70: Channel Manage

    Pic 4.40 tour configure 【interval】Set the patrol switch interval. The set range is 5-120 seconds. 【alarm tour】set the interval to shift alarm tour, range is 5-120 seconds, choose return when alarm ends, when alarm link to tour, system will auto shift to six-view after alarm finished.
  • Page 71 Channel manage page under all analog(DVR) mode...
  • Page 72 Channel manage page under Hybrid(HVR) mode / full digital(NVR) mode Pic 4.42 channel manage interface...
  • Page 73 Digital channel: Multi-linkage page of Digital channel Pic 4.43 digital channel interface 【Channel】select channel title 【Enable】Open digital channel, tick enable, then can do related settings 【Time Synchronization】Tick it means the time of this channel and device is the same. 【Connection Mode】can be singe connect or multi-ink, multi-link modes can connect to several devices, device will be tour displayed one by one, tour interval can be set, no less then 10s;...
  • Page 74 Pic 4.44 remote channel configure page 【Configure Name】device is with default configure title, user can revise it if necessary； 【Device Type】3 types: IPC、DVR、HVR，user can choose as what you like, default is IPC； 【Protocol】Default is TCP 【Remote channel】User can input remote channel title from the device that you want to connect remotely 【Stream】Default is main stream, do not support extra-stream at present；...
  • Page 75 Pic 4.45 the device list searched under remote channel setting Channel Status: channel status is to show the status of all the digital channel When there is what existing, status including Max Resolution, This Resolution, Connection Status. For example: The channel status for 4+2 mode is as below:...
  • Page 76 When a channel is added with device but it is not enable, you will see as below: Remark: when the current resolution is over the max resolution that the channel supported, then a red “X” will be shown on the preview image, for example: Under full digital channel mode, Max resolution of channel 3 is D1, if it was connected to a device with resolution over D1 ( such as 960H), you will see below pic: Channel mode:...

  • Page 77: Advanced

    Remark: this series of product with full analog channel mode, hybrid mode and full digital mode, and different model with different channel mode, user can shift the mode freely if necessary. 4.5 Advanced Manage tools menu including: HDD manage, account manage, online user, output adjust, auto maintain, upgrade.

  • Page 78: Account

    Pic 4.46 HDD manage 4.5.2 Account Manage the user purview. Note： 1. The character length is 8 bytes at most for the following user and user team name. The blank ahead or behind the character string is invalid.The middle blank in the character string is valid.
  • Page 79 Pic 4.47 account management 【Modify User】Modify the existed user attribute. 【Modify Group】Modify the existed team attribute. 【Modify Password】Modify the user password. You can set 1-6 bit password. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid.
  • Page 80 Pic 4.48 modify password 【Add user】Add a user in the group and set the user purview. Enter the menu interface and input the user name and password. Choose the team and choose whether cover using the user. Cover using means that the account can be used by multiple users at the same time.
  • Page 81 Pic 4.49 Add User 【Add Group】Add a user group and set the purview. There are 33 different purviews: shut down the equipment, real time surveillance, playback, record setting, video backup and so on.
  • Page 82 Pic 4.50 add group 【Delete User】Delete the current user. Choose the user and click delete user button. 【Delete Group】Delete the current group. Choose the group and click delete group button.

  • Page 83: Online User

    Pic 4.51 Delete Group 4.5.3 Online user To check the information of network user that connected with local device, also can tick the selected user to break up connection,（make √ at the box） ，then the user will be frozen after connection stopped, and will not log in until device reboot.

  • Page 84: Tv Adjust

    Pic 4.52 online user 4.5.4 TV adjust Refer to chapter 3.5.7 . 4.5.5 Auto Maintain The user can set the time to auto reboot and auto delete file.

  • Page 85: Restore

    Picture 4.39 Auto maintain 4.5.6 Restore The system restore to the default , You can choose the items according to the menu.
  • Page 86 Pic 4.54 Restore to default...

  • Page 87: Upgrade

    4.5.7 Upgrade Pic 4.55 Upgrade 【Upgrade】choose USB interface. 【Upgrade file】choose the upgrade file. 4.5.8 Device Info Provide device interface info like audio in, alarm in/out to be conveniently used for user.

  • Page 88: Import / Export

    Pic 4.56 device info 4.5.9 Import / Export Users can export the log info and the configure file from device to connected flash stick, and also can import related configure file from flash stick to settings, which greatly bring convenience to the customers.

  • Page 89: Info

    4.57 Import / Export interface 4.6 Info Display the hard disk information, including HDD info, code stream statistic, log info, version info 4.6.1 HDD info Display the hard disk state: hard disk type, overall capability, residual capability, the recording time and so on.

  • Page 90: Bps

    Pic 4.58 HDD info Tips：○ means that the hard disk is normal. X means that the hard disk is broken-down.- means that there is no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR and take up all the damaged hard disks, then install a new one. behind serial number means the current working disk such as 1*.

  • Page 91: Log

    Pic 4.59 BPS 4.6.3 LOG To search log information base on the set search mode. Log information include: system operation, configuration operation, data management, alarm affair, recording operation, user management, file management and so on. Set the time section to look up and click the look up button. The log information will display as a list. (one page is 128 items) Press Page up or Page down button to look up and press delete button to clear all the log information.

  • Page 92: Version

    Pic: 4.60 Log information 4.6.4 Version Display the basic information such as hardware information, software version, issue date, serial number , NAT status and so on.

  • Page 93: Shut Down System

    Pic 4.61 version information 4.7 Shut down system Refer to chapter 3.5.8.

  • Page 94: Chapter 5: Cloud Technology Basic Operation

    Chapter 5: Cloud Technology Basic Operation 5.1 Cloud technology monitor Cloud technology make the device one step on net, greatly bring convenience for customer to monitor via wide area network, this technology is using the serial no to visit device. Remark：the device that using cloud technology should be in the WAN( Wide Area Network )firstly.

  • Page 95: Faq And Maintenance

    6 FAQ and maintenance 6.1 FAQ If the problems are not listed, please contact the local service or call the HQ service. We are willing to offer the service. 1、 The DVR can not boot up normally. Possible reasons are as followed: The power supply is not correct.
  • Page 96 4、 There are no video outputs in single channel, multiple channels and all channels. Possible reasons are as followed: The program is not matched. Please update the program. The image brightness is all 0. Please restore the default setup. There is no video input signal or the signal is too weak. The channel protection or the screen protection is set.
  • Page 97 The hardware of the DVR is damaged. 8、 There is no audio signal in the surveillance window. Possible reasons are as followed: It is not an active tone arm. It is not an active sound box. The audio lines are damaged. The hardware of the DVR is damaged.
  • Page 98 Possible reasons are as followed: The time range set is not correct. The motion detect area set is not correct. The sensitivity is too low. Limited by some hardware edition. 13、 I can not login via web or CMS. Possible reasons are as followed: The system is windows 98 or win me.
  • Page 99 16、 There is something wrong with the USB backup or writing a CD. Possible reasons are as followed: The rewritable machine and the hard disk are shared the same data lines. The data is too much. Please stop recording and backup. The data exceeds the backup storage.
  • Page 100 The remote control distance is too far or the angle is too large. The battery is used up. The remote controller or the front panel of the recording machine is damaged. 21、 The storage time is not enough. Possible reasons are as followed: Front vidicon quality is bad.

  • Page 101: Maintenance

    9. The resolution of added device is too large to display by the monitor. Click “search” why not search out any of the device. 25、 Possible reasons are as followed: 1. There is no other device exist in the Local area network 2.
  • Page 102 Do not turn off the switch directly. Please use the turn-off function in the menu or press the turn-off button in the panel (3 seconds or longer) to protect the hard disk. Please keep the DVR away from heat resource. Please keep the DVR ventilated for better heat radiator.

  • Page 103: Appendix 1.Remote Controller Operation

    Appendix 1.Remote controller operation Serial Name Function number Multi-window Same function as Multi-window button in the front panel button Numeric button Code input/number input/channel switch 【Esc】 Same function as【Esc】button in the front panel Direction button Same function as direction button in the front panel Record control Control the record Same function as “Record mode”...

  • Page 104: Appendix 2.Mouse Operation

    Appendix 2.Mouse operation *Take right hand as an example The mouse in USB connection is supported. Operation Function Double click one item in the file list to playback the video Double click the playback video to zoom in or out the screen Double left click Double click the channel to make it full screen display double click again to resume the multi-window display...

  • Page 105: Appendix 3.Hard Disk Capability Calculation

    Appendix 3.Hard disk capability calculation Make sure the hard disk installed to the DVR for the first time. Pay attention to the IDE hard disk lines connection. 1、 Hard disk capability There is no limit for recording machine. We recommend 120G~250G size to keep better stability.

This manual is also suitable for:

Aip-d5 seriesAip-d7 series

Table of Contents