Advertisement
Available languages
Available languages
KNOW YOUR CHAIN SAW
READ THIS OPERATOR'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW, Compare the ifiustrations with your unit to familiarize yourself with the
location of the various controls and adjustments.
Save this manual for future ref-
erence.
Chain
Front Hand Guard
Front Handle
Adjustment TooI
(Bar Tool)
--._
Starter Rope
,;
ON/STOP
Switch
Chain
Muffler
Choke/
Fast Idle
Lever
Bar
Bar Oii Fill Cap
Sprocket
Hole
Starter Hous{_ng
Fuel Mix FillCap Primer Bulb
Cylinder Cover
t
Chain
_J
Brake
Throttle
Chain
Lock-out
Direction
Rear
of Travel
Handle
CRA
_--- Chain
Throttte
/
Catcher
Trigger
Clutch Cover
Bar Nuts
ON/STOP:SWITCH
= '
....
: ......
CHAIN BRAKE
_
:
The ON/STOPSW TCHis used to stop
The CHAIN BRAKEis a device designed
the engine.'
: :_
; :
to stop the chain if kickback occurs. The
THROTTLE TRIGGER
The THROTTLETRIGGERcontrols en-
gine speed,
THROTTLE LOCK-OUT
The THROTTLELOCK-OUT must be
pressed before you can squeeze the
throttle trigger. This feature prevents you
from accidentally squeezing the trigger.
CHOKE/FAST IDLE LEVER
The choke and fast idle are set by pull-
ing the CHOKE/FASTIDLE LEVERout to
the futt extent for cold starting or after
refueling, The choke provides additional
fuel to the engine during cold starting.
PRIMER BULB
The PRIMER BULB circulates fuel to the
Carburetor to provide quicker starting,
chain brake activates automatically in
the event of kickback. The chain brake
activates manually if the front hand
guard is pushed forward. The chain
brake is disengaged by pulling the front
hand guard back toward the front handle
as far as possible.
CHAIN TENSION
tt is normal for a new chain to stretch
during the first t5 minutes of operation.
"You should check your chain tension
each time before you start the chain
saw, See CHAIN TENSIONunder the
MAINTENANCEsection.
•8
Advertisement
